lkml.org 
[lkml]   [2017]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] ARM: dts: Add the CLCD controller to Cygnus.
From
Date
Hi Eric,

mode is correct, location in file needs to be moved.


On 17-08-31 11:54 AM, Eric Anholt wrote:
> This doesn't yet enable it on any particular platform, as we still
> need a panel driver for bcm911360_entphn.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>
> These bits are just carving off a little bit of my 911360_entphn panel
> series, to reduce conflicts when rebasing (which I just did for
> testing pl111 changes for cygnus regressions). I'm waiting to get my
> current RPi panel driver in before working on the 911360 panel again.
>
> arch/arm/boot/dts/bcm-cygnus.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 7c957ea06c66..74f73ff24aec 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -575,6 +575,16 @@
> status = "disabled";
> };
>
> + clcd: clcd@180a0000 {
please place in correct address ordered location in file
> + compatible = "arm,pl111", "arm,primecell";
> + reg = <0x180a0000 0x1000>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "combined";
> + clocks = <&axi41_clk>, <&apb_clk>;
> + clock-names = "clcdclk", "apb_pclk";
> + status = "disabled";
> + };
> +
> keypad: keypad@180ac000 {
> compatible = "brcm,bcm-keypad";
> reg = <0x180ac000 0x14c>;

\
 
 \ /
  Last update: 2017-08-31 22:17    [W:0.165 / U:0.228 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site