lkml.org 
[lkml]   [2017]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/13] openrisc: add simple_smp dts and defconfig for simulators
On Thu, Aug 31, 2017 at 07:03:11AM +0900, Stafford Horne wrote:
> From: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
>
> Simple enough to be compatible with simulation environments,
> such as verilated systems, QEMU and other targets supporting OpenRISC
> SMP. This also supports our base FPGA SoC's if the cpu frequency is
> upped to 50Mhz.
>
> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> [shorne@gmail.com: Added defconfig]
> Signed-off-by: Stafford Horne <shorne@gmail.com>
> ---
> arch/openrisc/boot/dts/simple_smp.dts | 58 ++++++++++++++++++++++++++
> arch/openrisc/configs/simple_smp_defconfig | 66 ++++++++++++++++++++++++++++++
> 2 files changed, 124 insertions(+)
> create mode 100644 arch/openrisc/boot/dts/simple_smp.dts
> create mode 100644 arch/openrisc/configs/simple_smp_defconfig
>
> diff --git a/arch/openrisc/boot/dts/simple_smp.dts b/arch/openrisc/boot/dts/simple_smp.dts
> new file mode 100644
> index 000000000000..47c54101baae
> --- /dev/null
> +++ b/arch/openrisc/boot/dts/simple_smp.dts
> @@ -0,0 +1,58 @@
> +/dts-v1/;
> +/ {
> + compatible = "opencores,or1ksim";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&pic>;
> +
> + chosen {
> + bootargs = "console=uart,mmio,0x90000000,115200";
> + };

Any reason this isn't using stdout-path?

> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x00000000 0x02000000>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu@0 {
> + compatible = "opencores,or1200-rtlsvn481";
> + reg = <0>;
> + clock-frequency = <20000000>;
> + };
> + cpu@1 {
> + compatible = "opencores,or1200-rtlsvn481";
> + reg = <1>;
> + clock-frequency = <20000000>;
> + };
> + };

No enable-method or similar?

Is your SMP bringup/teardown architected?

> +
> + ompic: ompic {
> + compatible = "ompic";

This needs a vendor prefix.

Thanks,
Mark.

\
 
 \ /
  Last update: 2017-08-31 12:43    [W:0.150 / U:15.340 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site