lkml.org 
[lkml]   [2017]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/4] fixes for latest bq27xxx driver and OpenPandora DT nodes
Date
Latest bq27xxx drivers allow to write RAM/NVRAM parameters
of the fuel gauge chip from values defined in board specific
device tree.

This allows to specify the battery properties of a standard
battery.

This patch set enables this for two chips where I have tested
it on real devices:

bq27421: Pyra handheld prototype
bq27500: OpenPandora 600 Mhz standard device

Since the Pyra DT is not yet mainlined, there are only DT
patches for the OpenPandora.

H. Nikolaus Schaller (4):
power: supply: bq27xxx: enable writing capacity values for bq27421
power: supply: bq27xxx: enable writing capacity values for bq27500
DT: OpenPandora: add battery node to describe OpenPandora battery
DT: OpenPandora: fix for configuration of bq27500 fuel gauge

arch/arm/boot/dts/omap3-pandora-common.dtsi | 11 ++++++++++-
drivers/power/supply/bq27xxx_battery.c | 8 --------
2 files changed, 10 insertions(+), 9 deletions(-)

--
2.12.2

\
 
 \ /
  Last update: 2017-08-31 10:22    [W:0.042 / U:4.528 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site