[lkml]   [2017]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH net-next 0/3] net: mvpp2: optional PHYs and GoP link irq
Hi all,

This series aims at make the driver work when no PHY is connected
between a port and the physical layer and not described as a fixed-phy.
This is useful for some usecases such as when a switch is connected
directly to the serdes lanes. It can also be used for SFP ports on the
7k-db and 8k-db while waiting for the phylink support to land in (which
should be part of another series).

This series makes the phy optional in the PPv2 driver, and then adds
the support for the GoP port link interrupt to handle link status
changes on such ports.

This was tested using the SFP ports on the 7k-db and 8k-db boards.


Antoine Tenart (3):
net: mvpp2: make the phy optional
net: mvpp2: use the GoP interrupt for link status changes
Documentation/bindings: net: marvell-pp2: add the link interrupt

.../devicetree/bindings/net/marvell-pp2.txt | 2 +-
drivers/net/ethernet/marvell/mvpp2.c | 208 +++++++++++++++++++--
2 files changed, 196 insertions(+), 14 deletions(-)


 \ /
  Last update: 2017-08-31 09:15    [W:0.031 / U:1.476 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site