lkml.org 
[lkml]   [2017]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support
Date
Hi Shawn,

Please see my explanation inline.

> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo@kernel.org]
> Sent: Thursday, August 03, 2017 9:40 AM
> To: Andy Tang <andy.tang@nxp.com>
> Cc: mark.rutland@arm.com; devicetree@vger.kernel.org;
> catalin.marinas@arm.com; will.deacon@arm.com; linux-
> kernel@vger.kernel.org; robh+dt@kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH 2/2] arm64: dts: ls2088a: add cpu idle support
>
> On Wed, Jul 26, 2017 at 03:24:53PM +0800, andy.tang@nxp.com wrote:
> > From: Yuantian Tang <andy.tang@nxp.com>
> >
> > ls2088a supports another cpu idle state which is pw20 which saves more
> > power when cpu is idle.
> > It was implemented through psci firmware.
> >
> > Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
>
> Can you explain a bit in the commit log why psci node is being added in fsl-
> ls208xa.dtsi while you are only adding idle state for ls2088a? Does that mean
> ls2088a and ls2080a gets different idle implementation?
>
IDLE implementation is same on both ls2080a and ls2088a. it is just there is no
Requirement for ls2080a though. Still it is better to update both.

I will resend the patch adding ls2080a supports.

Regards,
Andy

> Shawn
>
> > ---
> > arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +++++++++++++++++
> > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +++++
> > 2 files changed, 22 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> > index 5c695c6..6aa319d 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> > @@ -53,6 +53,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x0>;
> > clocks = <&clockgen 1 0>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster0_l2>;
> > #cooling-cells = <2>;
> > };
> > @@ -62,6 +63,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x1>;
> > clocks = <&clockgen 1 0>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster0_l2>;
> > };
> >
> > @@ -70,6 +72,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x100>;
> > clocks = <&clockgen 1 1>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster1_l2>;
> > #cooling-cells = <2>;
> > };
> > @@ -79,6 +82,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x101>;
> > clocks = <&clockgen 1 1>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster1_l2>;
> > };
> >
> > @@ -88,6 +92,7 @@
> > reg = <0x200>;
> > clocks = <&clockgen 1 2>;
> > next-level-cache = <&cluster2_l2>;
> > + cpu-idle-states = <&CPU_PW20>;
> > #cooling-cells = <2>;
> > };
> >
> > @@ -96,6 +101,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x201>;
> > clocks = <&clockgen 1 2>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster2_l2>;
> > };
> >
> > @@ -104,6 +110,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x300>;
> > clocks = <&clockgen 1 3>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster3_l2>;
> > #cooling-cells = <2>;
> > };
> > @@ -113,6 +120,7 @@
> > compatible = "arm,cortex-a72";
> > reg = <0x301>;
> > clocks = <&clockgen 1 3>;
> > + cpu-idle-states = <&CPU_PW20>;
> > next-level-cache = <&cluster3_l2>;
> > };
> >
> > @@ -131,6 +139,15 @@
> > cluster3_l2: l2-cache3 {
> > compatible = "cache";
> > };
> > +
> > + CPU_PW20: cpu-pw20 {
> > + compatible = "arm,idle-state";
> > + idle-state-name = "PW20";
> > + arm,psci-suspend-param = <0x00010000>;
> > + entry-latency-us = <2000>;
> > + exit-latency-us = <2000>;
> > + min-residency-us = <6000>;
> > + };
> > };
> >
> > &pcie1 {
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > index 94cdd30..205b7f7 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > @@ -118,6 +118,11 @@
> > interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
> > };
> >
> > + psci {
> > + compatible = "arm,psci-0.2";
> > + method = "smc";
> > + };
> > +
> > soc {
> > compatible = "simple-bus";
> > #address-cells = <2>;
> > --
> > 2.1.0.27.g96db324
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2017-08-03 10:40    [W:0.080 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site