Messages in this thread | | | Date | Tue, 29 Aug 2017 18:00:51 -0700 | From | Guenter Roeck <> | Subject | Re: [v2,2/2] hwmon: (ltq-cputemp) add devicetree bindings documentation |
| |
On Mon, Aug 21, 2017 at 02:41:23PM +0200, Florian Eckert wrote: > Document the devicetree bindings for the ltq-cputemp > > Signed-off-by: Florian Eckert <fe@dev.tdt.de>
When you resend, please copy DT maintainers.
> --- > Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt | 10 ++++++++++ > 1 file changed, 10 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt > new file mode 100644 > index 000000000000..991b05cbcb4a > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt > @@ -0,0 +1,10 @@ > +Lantiq cpu temperatur sensor driver
Nitpick: s/driver//
The file describes the sensor, not the driver.
> + > +Requires node properties:
Required
> +- "compatible" value :
Just "- compatible:" (without the '"')
> + "lantiq,cputemp" > + > +Example: > + cputemp@0 { > + compatible = "lantiq,cputemp"; > + };
| |