lkml.org 
[lkml]   [2017]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 3/5] power/generic-adc-battery: Add support for temperature and add check for charge from iio current channel
Hi,

On Tue, Aug 01, 2017 at 10:55:24PM +0200, Marek Belisko wrote:
> From: Marek Belisko <marek.belisko@gmail.com>
>
> Status reporting not working yet. During boot when workqueue is called status
> is updated (by reading iio current channel but value is -705 (reason unknown as later
> report correct value).
>
> Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
> ---
> drivers/power/supply/generic-adc-battery.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
> index d4daa6a..0d27b59 100644
> --- a/drivers/power/supply/generic-adc-battery.c
> +++ b/drivers/power/supply/generic-adc-battery.c
> @@ -31,6 +31,7 @@ enum gab_chan_type {
> GAB_VOLTAGE = 0,
> GAB_CURRENT,
> GAB_POWER,
> + GAB_TEMPERATURE,
> GAB_MAX_CHAN_TYPE
> };
>
> @@ -41,7 +42,8 @@ enum gab_chan_type {
> static const char *const gab_chan_name[] = {
> [GAB_VOLTAGE] = "voltage",
> [GAB_CURRENT] = "current",
> - [GAB_POWER] = "power",
> + [GAB_POWER] = "power",
> + [GAB_TEMPERATURE] = "temperature",
> };
>
> struct gab {
> @@ -78,6 +80,7 @@ static const enum power_supply_property gab_props[] = {
> POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_TEMP,
> };
>
> /*
> @@ -123,6 +126,8 @@ static enum gab_chan_type gab_prop_to_chan(enum power_supply_property psp)
> return GAB_VOLTAGE;
> case POWER_SUPPLY_PROP_CURRENT_NOW:
> return GAB_CURRENT;
> + case POWER_SUPPLY_PROP_TEMP:
> + return GAB_TEMPERATURE;
> default:
> WARN_ON(1);
> break;
> @@ -176,6 +181,7 @@ static int gab_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> case POWER_SUPPLY_PROP_CURRENT_NOW:
> case POWER_SUPPLY_PROP_POWER_NOW:
> + case POWER_SUPPLY_PROP_TEMP:
> ret = read_channel(adc_bat, psp, &result);
> if (ret < 0)
> goto err;
> @@ -210,13 +216,19 @@ static void gab_work(struct work_struct *work)
> struct delayed_work *delayed_work;
> bool is_plugged;
> int status;
> + int ret, iio_charge;
>
> delayed_work = to_delayed_work(work);
> adc_bat = container_of(delayed_work, struct gab, bat_work);
> pdata = adc_bat->pdata;
> status = adc_bat->status;
> -
> - is_plugged = power_supply_am_i_supplied(adc_bat->psy);
> + ret = read_channel(adc_bat, POWER_SUPPLY_PROP_CURRENT_NOW, &iio_charge);
> + if (ret < 0) {
> + pr_info("Cannot read current channel, ret:%d\n", ret);
> + iio_charge = 0;
> + } else
> + pr_info("iio_charge:%d\n", iio_charge);
> + is_plugged = power_supply_am_i_supplied(adc_bat->psy) || (iio_charge > 0);

This has nothing to do with adding temperature support and
I suspect, that you are missing proper supplied_by configuration,
so that power_supply_am_i_supplied does not work. Have a look at
the following file:

Documentation/devicetree/bindings/power/supply/power_supply.txt

-- Sebastian

> adc_bat->cable_plugged = is_plugged;
>
> if (!is_plugged)
> --
> 2.7.4
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-08-29 11:56    [W:0.565 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site