lkml.org 
[lkml]   [2017]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.12 44/99] ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC
Date
4.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vineet Gupta <vgupta@synopsys.com>

commit b5ddb6d54729d814356937572d6c9b599f10c29f upstream.

PAE40 confiuration in hardware extends some of the address registers
for TLB/cache ops to 2 words.

So far kernel was NOT setting the higher word if feature was not enabled
in software which is wrong. Those need to be set to 0 in such case.

Normally this would be done in the cache flush / tlb ops, however since
these registers only exist conditionally, this would have to be
conditional to a flag being set on boot which is expensive/ugly -
specially for the more common case of PAE exists but not in use.
Optimize that by zero'ing them once at boot - nobody will write to
them afterwards

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arc/include/asm/mmu.h | 2 ++
arch/arc/mm/cache.c | 34 ++++++++++++++++++++++++++++------
arch/arc/mm/tlb.c | 12 +++++++++++-
3 files changed, 41 insertions(+), 7 deletions(-)

--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -94,6 +94,8 @@ static inline int is_pae40_enabled(void)
return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
}

+extern int pae40_exist_but_not_enab(void);
+
#endif /* !__ASSEMBLY__ */

#endif
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -1123,6 +1123,13 @@ noinline void __init arc_ioc_setup(void)
__dc_enable();
}

+/*
+ * Cache related boot time checks/setups only needed on master CPU:
+ * - Geometry checks (kernel build and hardware agree: e.g. L1_CACHE_BYTES)
+ * Assume SMP only, so all cores will have same cache config. A check on
+ * one core suffices for all
+ * - IOC setup / dma callbacks only need to be done once
+ */
void __init arc_cache_init_master(void)
{
unsigned int __maybe_unused cpu = smp_processor_id();
@@ -1202,12 +1209,27 @@ void __ref arc_cache_init(void)

printk(arc_cache_mumbojumbo(0, str, sizeof(str)));

- /*
- * Only master CPU needs to execute rest of function:
- * - Assume SMP so all cores will have same cache config so
- * any geomtry checks will be same for all
- * - IOC setup / dma callbacks only need to be setup once
- */
if (!cpu)
arc_cache_init_master();
+
+ /*
+ * In PAE regime, TLB and cache maintenance ops take wider addresses
+ * And even if PAE is not enabled in kernel, the upper 32-bits still need
+ * to be zeroed to keep the ops sane.
+ * As an optimization for more common !PAE enabled case, zero them out
+ * once at init, rather than checking/setting to 0 for every runtime op
+ */
+ if (is_isa_arcv2() && pae40_exist_but_not_enab()) {
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE))
+ write_aux_reg(ARC_REG_IC_PTAG_HI, 0);
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE))
+ write_aux_reg(ARC_REG_DC_PTAG_HI, 0);
+
+ if (l2_line_sz) {
+ write_aux_reg(ARC_REG_SLC_RGN_END1, 0);
+ write_aux_reg(ARC_REG_SLC_RGN_START1, 0);
+ }
+ }
}
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -104,6 +104,8 @@
/* A copy of the ASID from the PID reg is kept in asid_cache */
DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;

+static int __read_mostly pae_exists;
+
/*
* Utility Routine to erase a J-TLB entry
* Caller needs to setup Index Reg (manually or via getIndex)
@@ -784,7 +786,7 @@ void read_decode_mmu_bcr(void)
mmu->u_dtlb = mmu4->u_dtlb * 4;
mmu->u_itlb = mmu4->u_itlb * 4;
mmu->sasid = mmu4->sasid;
- mmu->pae = mmu4->pae;
+ pae_exists = mmu->pae = mmu4->pae;
}
}

@@ -809,6 +811,11 @@ char *arc_mmu_mumbojumbo(int cpu_id, cha
return buf;
}

+int pae40_exist_but_not_enab(void)
+{
+ return pae_exists && !is_pae40_enabled();
+}
+
void arc_mmu_init(void)
{
char str[256];
@@ -859,6 +866,9 @@ void arc_mmu_init(void)
/* swapper_pg_dir is the pgd for the kernel, used by vmalloc */
write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir);
#endif
+
+ if (pae40_exist_but_not_enab())
+ write_aux_reg(ARC_REG_TLBPD1HI, 0);
}

/*

\
 
 \ /
  Last update: 2017-08-28 11:16    [W:0.326 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site