lkml.org 
[lkml]   [2017]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/11] staging: typec: tcpm: Do not send PING msgs in TCPM
On Sat, Aug 26, 2017 at 11:52:00PM -0700, Badhri Jagan Sridharan wrote:
> PING messages are used to monitor the connect/disconnect.
> However, when PD is carried over CC, so this is not required.
>
> Also, the spec does not clearly say if PD is possible when
> Type-c is connected to Type-A/B. So, removing sending
> PING messages altogether.
>
> Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> drivers/staging/typec/tcpm.c | 11 ++++-------
> 1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
> index a7da609006f5..9e0111dea7c4 100644
> --- a/drivers/staging/typec/tcpm.c
> +++ b/drivers/staging/typec/tcpm.c
> @@ -2335,14 +2335,11 @@ static void run_state_machine(struct tcpm_port *port)
> * - The system is not operating in PD mode
> * or
> * - Both partners are connected using a Type-C connector
> - * XXX How do we know that ?
> + *
> + * There is no actual need to send PD messages since the local
> + * port type-c and the spec does not clearly say whether PD is
> + * possible when type-c is connected to Type-A/B
> */
> - if (port->pwr_opmode == TYPEC_PWR_MODE_PD &&
> - !port->op_vsafe5v) {
> - tcpm_pd_send_control(port, PD_CTRL_PING);
> - tcpm_set_state_cond(port, SRC_READY,
> - PD_T_SOURCE_ACTIVITY);
> - }
> break;
> case SRC_WAIT_NEW_CAPABILITIES:
> /* Nothing to do... */
> --
> 2.14.1.342.g6490525c54-goog
>

\
 
 \ /
  Last update: 2017-08-27 19:28    [W:0.045 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site