lkml.org 
[lkml]   [2017]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/3] arm: dts: add Nuvoton NPCM750 device tree
On Mon, Aug 21, 2017 at 08:35:01PM -0700, Brendan Higgins wrote:
> Add a common device tree for all Nuvoton NPCM750 BMCs and a board
> specific device tree for the NPCM750 (Poleg) evaluation board.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> ---
> .../devicetree/bindings/arm/npcm/npcm.txt | 6 +
> arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 63 ++++++
> arch/arm/boot/dts/nuvoton-npcm750.dtsi | 222 +++++++++++++++++++++
> include/dt-bindings/clock/nuvoton,npcm7xx-clks.h | 39 ++++
> 4 files changed, 330 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
> create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi
> create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
>
> diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
> new file mode 100644
> index 000000000000..19aabe9a7414
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
> @@ -0,0 +1,6 @@
> +NPCM Platforms Device Tree Bindings
> +-----------------------------------
> +NPCM750 SoC
> +Required root node properties:
> + - compatible = "nuvoton,npcm750";
> + - enable-method = "nuvoton,npcm7xx-smp"; required for dual core variant.

enable-method is not a root node property. There's a file to document
all of these.

> diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> new file mode 100644
> index 000000000000..10f523388dc1
> --- /dev/null
> +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> @@ -0,0 +1,63 @@
> +/*
> + * DTS file for all NPCM750 SoCs
> + *
> + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "nuvoton-npcm750.dtsi"
> +
> +/ {
> + model = "Nuvoton npcm750 Development Board (Device Tree)";
> + compatible = "nuvoton,npcm750";
> + enable-method = "nuvoton,npcm7xx-smp";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + };
> +
> + memory {
> + reg = <0 0x40000000>;
> + };
> +
> + clocks {
> + clk: clock-controller@f0801000 {
> + status = "okay";
> + };
> + };
> +
> + ahb {
> + };

You don't need this.

> +
> + apb {
> + watchdog1: watchdog@f0009000 {
> + status = "okay";
> + };
> +
> + uart0: uart0@f0001000 {

Use generic node names.

s/uart/serial/

> + status = "okay";
> + };
> +
> + uart1: uart1@f0002000 {
> + status = "okay";
> + };
> +
> + uart2: uart2@f0003000 {
> + status = "okay";
> + };
> +
> + uart3: uart3@f0004000 {
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
> new file mode 100644
> index 000000000000..fc64550c49a6
> --- /dev/null
> +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
> @@ -0,0 +1,222 @@
> +/*
> + * DTSi file for the NPCM750 SoC
> + *
> + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include "skeleton.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/nuvoton,npcm7xx-clks.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <0>;
> + next-level-cache = <&L2>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <1>;
> + next-level-cache = <&L2>;
> + };
> +
> + };
> +
> + L2: l2-cache {
> + compatible = "arm,pl310-cache";
> + reg = <0xf03fc000 0x80000>;

Pretty sure the PL310 doesn't have 512KB of address space.

> + interrupts = <0 21 4>;
> + cache-unified;
> + cache-level = <2>;
> + clocks = <&clk NPCM7XX_CLK_AXI>;
> + clock-names = "clk_axi";

> + };
> +
> + clocks {

Indentation is wrong.

> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clk: clock-controller@f0801000 {

unit-address is not valid without a reg property.

> + compatible = "nuvoton,npcm750-clk";
> + #clock-cells = <1>;
> + };
> +
> + /* external clock signal rg1refck, supplied by the phy */
> + clk_rg1refck: clk_rg1refck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + clock-output-names = "clk_rg1refck";
> + };
> +
> + /* external clock signal rg2refck, supplied by the phy */
> + clk_rg2refck: clk_rg2refck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + clock-output-names = "clk_rg2refck";
> + };
> +
> + clk_xin: clk_xin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + clock-output-names = "clk_xin";
> + };

These 3 clocks are not part of the bus, so move to top level.

> + };
> +
> + ahb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges = <0x80000000 0x80000000 0x20000000 /* AHB18 */
> + 0xa0000000 0xa0000000 0x28000000 /* AHB3 */
> + 0xe0000000 0xe0000000 0x10000000 /* AHB14 */
> + 0xf0000000 0xf0000000 0x00800000 /* AHB1 */
> + 0xf0800000 0xf0800000 0x00800000 /* AHB8 */
> + 0xf8000000 0xf8000000 0x04000000 /* AHB18 - cont */
> + 0xfffd0000 0xfffd0000 0x00040000>; /* RAM2 */
> +
> + gic: interrupt-controller@f03ff000 {
> + compatible = "arm,cortex-a9-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0xf03ff000 0x1000>,
> + <0xf03fe100 0x100>;
> + };
> +
> + gcr: gcr@f0800000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "nuvoton,npcm750-gcr", "syscon",
> + "simple-mfd";
> + reg = <0xf0800000 0x1000>;
> + };
> +
> + scu: scu@f03fe000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "arm,cortex-a9-scu";
> + reg = <0xf03fe000 0x1000>;
> + };
> +
> + clk_rst: clk_rst@f0801000 {

Don't use '_' in node or property names.

Build your dtb with W=2 and fix any warnings.

> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "nuvoton,npcm750-clk_rst", "syscon",
> + "simple-mfd";
> + reg = <0xF0801000 0x1000>;
> + };
> +
> + twd: timer@f03fe600 {
> + compatible = "arm,cortex-a9-twd-timer";
> + reg = <0xf03fe600 0x20>;
> + interrupts = <1 13 0x304>;
> + };
> + };
> +
> + apb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges = <0xf0000000 0xf0000000 0x00080000
> + 0xf0080000 0xf0080000 0x00080000

You have overlapping addresses at least in the ranges. Make sure you
don't actually have any regions overlapping.

It looks like you don't really need this entry.

> + 0xf0100000 0xf0100000 0x00080000
> + 0xf0180000 0xf0180000 0x00080000
> + 0xf0200000 0xf0200000 0x00600000>;
> +
> + timer0: timer@f0000000 {
> + compatible = "nuvoton,npcm750-timer";
> + interrupts = <0 32 4>;
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + clock-names = "clk_timer";

-names is pointless when there is only 1.

> + };
> +
> + watchdog0: watchdog@f0008000 {
> + compatible = "nuvoton,npcm750-wdt";
> + interrupts = <0 47 4>;
> + reg = <0xf0008000 0x1000>;
> + status = "disabled";
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + clock-names = "clk_timer";
> + };
> +
> + watchdog1: watchdog@f0009000 {
> + compatible = "nuvoton,npcm750-wdt";
> + interrupts = <0 48 4>;
> + reg = <0xf0009000 0x1000>;
> + status = "disabled";
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + clock-names = "clk_timer";
> + };
> +
> + watchdog2: watchdog@f000a000 {
> + compatible = "nuvoton,npcm750-wdt";
> + interrupts = <0 49 4>;
> + reg = <0xf000a000 0x1000>;
> + status = "disabled";
> + clocks = <&clk NPCM7XX_CLK_TIMER>;
> + clock-names = "clk_timer";
> + };
> +
> + uart0: uart0@f0001000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0001000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + clock-names = "clk_uart";
> + interrupts = <0 2 4>;
> + status = "disabled";
> + };
> +
> + uart1: uart1@f0002000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0002000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + clock-names = "clk_uart";
> + interrupts = <0 3 4>;
> + status = "disabled";
> + };
> +
> + uart2: uart2@f0003000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0003000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + clock-names = "clk_uart";
> + interrupts = <0 4 4>;
> + status = "disabled";
> + };
> +
> + uart3: uart3@f0004000 {
> + compatible = "nuvoton,npcm750-uart";
> + reg = <0xf0004000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_UART_CORE>;
> + clock-names = "clk_uart";
> + interrupts = <0 5 4>;
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
> new file mode 100644
> index 000000000000..c69d3bbf7e42
> --- /dev/null
> +++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2016 Nuvoton Technologies, tali.perry@nuvoton.com
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_NPCM7XX_H
> +#define _DT_BINDINGS_CLK_NPCM7XX_H
> +
> +#define NPCM7XX_CLK_PLL0 0
> +#define NPCM7XX_CLK_PLL1 1
> +#define NPCM7XX_CLK_PLL2 2
> +#define NPCM7XX_CLK_GFX 3
> +#define NPCM7XX_CLK_APB1 4
> +#define NPCM7XX_CLK_APB2 5
> +#define NPCM7XX_CLK_APB3 6
> +#define NPCM7XX_CLK_APB4 7
> +#define NPCM7XX_CLK_APB5 8
> +#define NPCM7XX_CLK_MC 9
> +#define NPCM7XX_CLK_CPU 10
> +#define NPCM7XX_CLK_SPI0 11
> +#define NPCM7XX_CLK_SPI3 12
> +#define NPCM7XX_CLK_SPIX 13
> +#define NPCM7XX_CLK_UART_CORE 14
> +#define NPCM7XX_CLK_TIMER 15
> +#define NPCM7XX_CLK_HOST_UART 16
> +#define NPCM7XX_CLK_MMC 17
> +#define NPCM7XX_CLK_SDHC 18
> +#define NPCM7XX_CLK_ADC 19
> +#define NPCM7XX_CLK_GFX_MEM 20
> +#define NPCM7XX_CLK_USB_BRIDGE 21
> +#define NPCM7XX_CLK_AXI 22
> +#define NPCM7XX_CLK_AHB 23
> +#define NPCM7XX_CLK_EMC 24
> +#define NPCM7XX_CLK_GMAC 25
> +
> +#endif
> --
> 2.14.1.480.gb18f417b89-goog
>

\
 
 \ /
  Last update: 2017-08-25 20:27    [W:2.653 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site