lkml.org 
[lkml]   [2017]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/12] PM / devfreq: Show the available min/max frequency through sysfs node
Date
The existing {min|max}_freq sysfs nodes don't consider whether min/max_freq
are available or not. Those sysfs nodes show just the stored value
in the struct devfreq.

The devfreq uses the OPP interface and then dev_pm_opp_{disable|add}()
might change the state of the device's supported frequency. This patch
shows the available minimum and maximum frequency through sysfs node.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/devfreq/devfreq.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index be3d42f140ff..8b0bbfa0a50b 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -1148,7 +1148,14 @@ static ssize_t min_freq_store(struct device *dev, struct device_attribute *attr,
static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- return sprintf(buf, "%lu\n", to_devfreq(dev)->min_freq);
+ struct devfreq *df = to_devfreq(dev);
+ unsigned long min_freq = to_devfreq(dev)->min_freq;
+ unsigned long available_min_freq = find_available_min_freq(df);
+
+ if (available_min_freq != 0 && min_freq < available_min_freq)
+ min_freq = available_min_freq;
+
+ return sprintf(buf, "%lu\n", min_freq);
}

static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr,
@@ -1186,7 +1193,14 @@ static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr,
static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq);
+ struct devfreq *df = to_devfreq(dev);
+ unsigned long max_freq = to_devfreq(dev)->max_freq;
+ unsigned long available_max_freq = find_available_max_freq(df);
+
+ if (available_max_freq != 0 && max_freq > available_max_freq)
+ max_freq = available_max_freq;
+
+ return sprintf(buf, "%lu\n", max_freq);
}
static DEVICE_ATTR_RW(max_freq);

--
1.9.1
\
 
 \ /
  Last update: 2017-08-24 03:45    [W:0.718 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site