lkml.org 
[lkml]   [2017]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/5] dt-bindings: sdhci-omap: Add bindings for the sdhci-omap controller
From
Date
Hi Uffe,

On Wednesday 23 August 2017 06:37 PM, Ulf Hansson wrote:
> On 23 August 2017 at 07:42, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>> Add binding for the TI's sdhci-omap controller. This now includes only
>> a subset of properties documented in ti-omap-hsmmc.txt but will eventually
>> include all the properties.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> Changes from v2:
>> *) Fixed example to use the updated compatible
>>
>> Changes from v1:
>> *) Create a new sdhci-omap.txt document for TI's sdhci-omap controller instead
>> of using the ti-omap-hsmmc.txt as suggested by Tony
>> .../devicetree/bindings/mmc/sdhci-omap.txt | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>> new file mode 100644
>> index 000000000000..139695ad2d58
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>> @@ -0,0 +1,22 @@
>> +* TI OMAP SDHCI Controller
>> +
>> +Refer to mmc.txt for standard MMC bindings.
>> +
>> +Required properties:
>> +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
>> +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
>> +
>> +Optional properties:
>> +- ti,dual-volt: boolean, supports dual voltage cards
>> +- ti,non-removable: non-removable slot (like eMMC)
>> +
>> +Example:
>> + mmc1: mmc@0x4809c000 {
>> + compatible = "ti,dra7-sdhci";
>> + reg = <0x4809c000 0x400>;
>> + ti,hwmods = "mmc1";
>> + ti,dual-volt;
>> + bus-width = <4>;
>> + vmmc-supply = <&vmmc>; /* phandle to regulator node */
>> + ti,non-removable;
>> + };
>> --
>> 2.11.0
>>
>
> I am wondering a bit on the long term plan here.
>
> Ideally at some point in future, we would like to remove the old
> omap_hsmmc driver, but from compatible string point of view, that
> means we first needs to deprecate the old ones for a while. Right?

right but sdhci-omap is still lacking features that was present in omap_hsmmc
like context save/restore, SDIO support etc. I think we should deprecate
omap_hsmmc compatible once we add all the features in sdhci-omap?
>
> That said, what is then the reason to why we should bring over the
> existing omap_hsmmc bindings to the sdhci-omap bindings?

This is mainly for old dt compatibility. Even after removing the omap_hsmmc
driver, users should still be able to use newer kernel with their existing dtbs.

Thanks
Kishon

\
 
 \ /
  Last update: 2017-08-23 16:00    [W:0.138 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site