lkml.org 
[lkml]   [2017]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 net-next] net: hns3: Add support to change MTU in HNS3 hardware
Date
This patch adds the following support to the HNS3 driver:
1. Support to change the Maximum Transmission Unit of a
port in the HNS NIC hardware.
2. Initializes the supported MTU range for the netdevice.

Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
PATCH V4: Addressed some minor comments Leon Romanovsky
1. https://lkml.org/lkml/2017/8/21/212
PATCH V3: Addressed some minor comments Leon Romanovsky
1. https://lkml.org/lkml/2017/8/20/27
PATCH V2: Addresses comments given by Andrew Lunn
1. https://lkml.org/lkml/2017/8/18/282
PATCH V1: Initial Submit
---
.../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 34 ++++++++++++++++++++++
.../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h | 1 +
2 files changed, 35 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
index e731f87..1c3e294 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -1278,11 +1278,42 @@ static int hns3_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan,
return ret;
}

+static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hnae3_handle *h = priv->ae_handle;
+ bool if_running = netif_running(netdev);
+ int ret;
+
+ if (!h->ae_algo->ops->set_mtu)
+ return -EOPNOTSUPP;
+
+ /* if this was called with netdev up then bring netdevice down */
+ if (if_running) {
+ (void)hns3_nic_net_stop(netdev);
+ msleep(100);
+ }
+
+ ret = h->ae_algo->ops->set_mtu(h, new_mtu);
+ if (ret) {
+ netdev_err(netdev, "failed to change MTU in hardware %d\n",
+ ret);
+ return ret;
+ }
+
+ /* if the netdev was running earlier, bring it up again */
+ if (if_running && hns3_nic_net_open(netdev))
+ ret = -EINVAL;
+
+ return ret;
+}
+
static const struct net_device_ops hns3_nic_netdev_ops = {
.ndo_open = hns3_nic_net_open,
.ndo_stop = hns3_nic_net_stop,
.ndo_start_xmit = hns3_nic_net_xmit,
.ndo_set_mac_address = hns3_nic_net_set_mac_address,
+ .ndo_change_mtu = hns3_nic_change_mtu,
.ndo_set_features = hns3_nic_set_features,
.ndo_get_stats64 = hns3_nic_get_stats64,
.ndo_setup_tc = hns3_nic_setup_tc,
@@ -2752,6 +2783,9 @@ static int hns3_client_init(struct hnae3_handle *handle)
goto out_reg_netdev_fail;
}

+ /* MTU range: (ETH_MIN_MTU(kernel default) - 9706) */
+ netdev->max_mtu = HNS3_MAX_MTU - (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN);
+
return ret;

out_reg_netdev_fail:
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h
index a6e8f15..7e87461 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h
@@ -76,6 +76,7 @@ enum hns3_nic_state {
#define HNS3_RING_NAME_LEN 16
#define HNS3_BUFFER_SIZE_2048 2048
#define HNS3_RING_MAX_PENDING 32768
+#define HNS3_MAX_MTU 9728

#define HNS3_BD_SIZE_512_TYPE 0
#define HNS3_BD_SIZE_1024_TYPE 1
--
2.7.4

\
 
 \ /
  Last update: 2017-08-21 16:41    [W:0.040 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site