lkml.org 
[lkml]   [2017]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/9] Ata ceva patches
Date
Hi,

this patchset contains the latest changes which are available in Xilinx tree.

Thanks,
Michal

Changes in v2:
- DT fix naming in parameters description use pN instead of phy
reported by Rob

Anurag Kumar Vulisha (9):
devicetree: bindings: Add sata port phy config parameters in ahci-ceva
ata: ceva: Move sata port phy oob settings to device-tree
ata: ceva: Add gen 3 mode support in driver
ata: ceva: Disable Device Sleep capability
ata: ceva: Make RxWaterMark value as module parameter
ata: ceva: Add CCI support for SATA if CCI is enabled
ata: ceva: Correct the AXI bus configuration for SATA ports
ata: ceva: Correct the suspend and resume logic for SATA
ata: ceva: Add SMMU support for SATA IP

.../devicetree/bindings/ata/ahci-ceva.txt | 39 ++++
drivers/ata/ahci_ceva.c | 197 +++++++++++++++++----
2 files changed, 198 insertions(+), 38 deletions(-)

--
1.9.1

\
 
 \ /
  Last update: 2017-08-21 13:18    [W:0.935 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site