Messages in this thread | | | From | Varadarajan Narayanan <> | Subject | [PATCH v8 0/3] Add support for IPQ8074 PCIe phy and controller | Date | Thu, 17 Aug 2017 16:50:55 +0530 |
| |
v8: Incorporate Stanimir's feedback for PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
v7: Skip PHY patches as they are already included by Kishon
Incorporate Stanimir's feedback for the below patches PCI: dwc: qcom: Use block IP version for operations PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
v6: Added 'Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>' and fixed white space issues as mentioned by Vivek. phy: qcom-qmp: Fix phy pipe clock name dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
v5: dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 Renamed phy_phy clock as common clock
phy: qcom-qmp: Fix phy pipe clock name Moved the DT get into the registering function
phy: qcom-qmp: Add support for IPQ8074 Place the IPQ8074 related structs similar to existing SoC. Renamed phy_phy clock as common clock v4: phy: qcom-qmp: Fix phy pipe clock name Based on Vivek's comments, return failure only for PCI/USB type of phys. Removed Ack.
phy: qcom-qmp: Handle unavailable registers Removed this patch. Incorrectly used a block of code that is not applicable to IPQ8074, hence had to avoid an "unavailable" register. Since that is addressed using 'has_phy_com_ctrl' this patch is not needed.
phy: qcom-qmp: Add support for IPQ8074 Set 'has_phy_com_ctrl' to false Remove ipq8074_pciephy_regs_layout
v3: PCI: dwc: qcom: Add support for IPQ8074 PCIe controller Incoporate Stan's feedback:- - Add SoC Wrapper and Synopsys Core IP versions
v2: dt-bindings: phy: qmp: Add output-clock-names Added Rob H's Ack
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 Removed example Added IPQ8074 specific details
phy: qcom-qmp: Fix phy pipe clock name Added Vivek's Ack
phy: qcom-qmp: Handle unavailable registers No changes
phy: qcom-qmp: Add support for IPQ8074 No changes
PCI: dwc: qcom: Use block IP version for operations Added new patch to use block IP version instead of v1, v2...
dt-bindings: pci: qcom: Add support for IPQ8074 Removed example Added IPQ8074 specific details
PCI: dwc: qcom: Add support for IPQ8074 PCIe controller Incorporated Bjorn's feedback:- - Removed reset names, helper function to assert/deassert, helper function to R/M/W register. - Renamed sys_noc clock as iface clock - Added deinit if phy power on fails
v1: Add definitions required to enable QMP phy support for IPQ8074.
Add support for the IPQ8074 PCIe controller. IPQ8074 supports Gen 1/2, one lane, two PCIe root complex with support for MSI and legacy interrupts, and it conforms to PCI Express Base 2.1 specification.
Varadarajan Narayanan (3): PCI: dwc: qcom: Use block IP version for operations dt-bindings: pci: qcom: Add support for IPQ8074 PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
.../devicetree/bindings/pci/qcom,pcie.txt | 23 ++ drivers/pci/dwc/pcie-qcom.c | 340 +++++++++++++++++---- 2 files changed, 299 insertions(+), 64 deletions(-)
-- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
| |