lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] dt-bindings: mt8173-xhci: add generic compatible and rename file
Date
The mt8173-xhci.txt actually holds the bindings for all mediatek
SoCs with xHCI controller, so add a generic compatible and change
the name to mediatek,mtk-xhci.txt to reflect that.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../usb/{mt8173-xhci.txt => mediatek,mtk-xhci.txt} | 14 +++++++++++---
.../devicetree/bindings/usb/mediatek,mtu3.txt | 2 +-
2 files changed, 12 insertions(+), 4 deletions(-)
rename Documentation/devicetree/bindings/usb/{mt8173-xhci.txt => mediatek,mtk-xhci.txt} (85%)

diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
similarity index 85%
rename from Documentation/devicetree/bindings/usb/mt8173-xhci.txt
rename to Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 0acfc8a..ff21135 100644
--- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -11,7 +11,11 @@ into two parts.
------------------------------------------------------------------------

Required properties:
- - compatible : should contain "mediatek,mt8173-xhci"
+ - compatible : should be "mediatek,soc-model-xhci", "mediatek,mtk-xhci",
+ soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
+ "mediatek,mtk-xhci" compatible string, you need SoC specific ones in
+ addition, one of:
+ - "mediatek,mt8173-xhci"
- reg : specifies physical base address and size of the registers
- reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
- interrupts : interrupt used by the controller
@@ -68,10 +72,14 @@ usb30: usb@11270000 {

In the case, xhci is added as subnode to mtu3. An example and the DT binding
details of mtu3 can be found in:
-Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
+Documentation/devicetree/bindings/usb/mediatek,mtu3.txt

Required properties:
- - compatible : should contain "mediatek,mt8173-xhci"
+ - compatible : should be "mediatek,soc-model-xhci", "mediatek,mtk-xhci",
+ soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
+ "mediatek,mtk-xhci" compatible string, you need SoC specific ones in
+ addition, one of:
+ - "mediatek,mt8173-xhci"
- reg : specifies physical base address and size of the registers
- reg-names: should be "mac" for xHCI MAC
- interrupts : interrupt used by the host controller
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 545251e..722a029 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -48,7 +48,7 @@ Optional properties:
Sub-nodes:
The xhci should be added as subnode to mtu3 as shown in the following example
if host mode is enabled. The DT binding details of xhci can be found in:
-Documentation/devicetree/bindings/usb/mt8173-xhci.txt
+Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt

Example:
ssusb: usb@11271000 {
--
1.7.9.5
\
 
 \ /
  Last update: 2017-08-16 08:09    [W:2.220 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site