lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH] media: vb2: add bidirectional flag in vb2_queue
Date
Hi Stan,

On Wednesday 16 Aug 2017 14:46:50 Stanimir Varbanov wrote:
> On 08/15/2017 01:04 PM, Hans Verkuil wrote:
> > On 08/14/17 10:41, Stanimir Varbanov wrote:
> >> Hi,
> >>
> >> This RFC patch is intended to give to the drivers a choice to change
> >> the default behavior of the v4l2-core DMA mapping direction from
> >> DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or OUTPUT)
> >> to DMA_BIDIRECTIONAL during queue_init time.
> >>
> >> Initially the issue with DMA mapping direction has been found in
> >> Venus encoder driver where the firmware side of the driver adds few
> >> lines padding on bottom of the image buffer, and the consequence was
> >> triggering of IOMMU protection faults.
> >>
> >> Probably other drivers could also has a benefit of this feature (hint)
> >> in the future.
> >>
> >> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> >> ---
> >>
> >> drivers/media/v4l2-core/videobuf2-core.c | 3 +++
> >> include/media/videobuf2-core.h | 11 +++++++++++
> >> 2 files changed, 14 insertions(+)
> >>
> >> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> >> b/drivers/media/v4l2-core/videobuf2-core.c index
> >> 14f83cecfa92..17d07fda4cdc 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-core.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> >> @@ -200,6 +200,9 @@ static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
> >>
> >> int plane;
> >> int ret = -ENOMEM;
> >>
> >> + if (q->bidirectional)
> >> + dma_dir = DMA_BIDIRECTIONAL;
> >> +
> >
> > Does this only have to be used in mem_alloc? In the __prepare_*() it is
> > still using DMA_TO/FROM_DEVICE.
>
> Yes, it looks like the DMA direction should be covered in the
> __prepare_* too. Thus the patch should look like below:
>
> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> b/drivers/media/v4l2-core/videobuf2-core.c
> index 14f83cecfa92..0089e7dac7dd 100644
> --- a/drivers/media/v4l2-core/videobuf2-core.c
> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> @@ -188,14 +188,21 @@ module_param(debug, int, 0644);
> static void __vb2_queue_cancel(struct vb2_queue *q);
> static void __enqueue_in_driver(struct vb2_buffer *vb);
>
> +static enum dma_data_direction __get_dma_dir(struct vb2_queue *q)
> +{
> + if (q->bidirectional)
> + return DMA_BIDIRECTIONAL;
> +
> + return q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;

We could also compute the DMA direction once only and store it in the queue. I
have no big preference at the moment.

> +}
> +
> /**
> * __vb2_buf_mem_alloc() - allocate video memory for the given buffer
> */
> static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
> {
> struct vb2_queue *q = vb->vb2_queue;
> - enum dma_data_direction dma_dir =
> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> + enum dma_data_direction dma_dir = __get_dma_dir(q);
> void *mem_priv;
> int plane;
> int ret = -ENOMEM;
> @@ -978,8 +985,7 @@ static int __prepare_userptr(struct vb2_buffer *vb,
> const void *pb)
> void *mem_priv;
> unsigned int plane;
> int ret = 0;
> - enum dma_data_direction dma_dir =
> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> + enum dma_data_direction dma_dir = __get_dma_dir(q);
> bool reacquired = vb->planes[0].mem_priv == NULL;
>
> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
> @@ -1096,8 +1102,7 @@ static int __prepare_dmabuf(struct vb2_buffer *vb,
> const void *pb)
> void *mem_priv;
> unsigned int plane;
> int ret = 0;
> - enum dma_data_direction dma_dir =
> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> + enum dma_data_direction dma_dir = __get_dma_dir(q);
> bool reacquired = vb->planes[0].mem_priv == NULL;
>
> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2017-08-16 14:28    [W:0.107 / U:1.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site