lkml.org 
[lkml]   [2017]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] ARM: dts: cygnus: place v3d in proper address ordered location
Date
Move v3d devicetree node to proper address ordered location in Cygnus
dtsi.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index e4d07f4..2077fee 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -366,6 +366,19 @@
brcm,nand-has-wp;
};

+ v3d: v3d@180a2000 {
+ compatible = "brcm,cygnus-v3d";
+ reg = <0x180a2000 0x1000>;
+ clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+ clock-names = "v3d_clk";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vc4: gpu {
+ compatible = "brcm,cygnus-vc4";
+ };
+
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
@@ -444,19 +457,6 @@
status = "disabled";
};

- v3d: v3d@180a2000 {
- compatible = "brcm,cygnus-v3d";
- reg = <0x180a2000 0x1000>;
- clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
- clock-names = "v3d_clk";
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- vc4: gpu {
- compatible = "brcm,cygnus-vc4";
- };
-
adc: adc@180a6000 {
compatible = "brcm,iproc-static-adc";
#io-channel-cells = <1>;
--
2.5.0
\
 
 \ /
  Last update: 2017-08-15 19:27    [W:0.065 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site