lkml.org 
[lkml]   [2017]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: mtd: Altera ASMI Parallel II IP Core

Hi Rob,

Thanks for the feedback. Please see my comments in line.

Matthew Gerlach

On Thu, 10 Aug 2017, Rob Herring wrote:

> On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerlach@linux.intel.com wrote:
>> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>>
>> Device Tree bindinds for Altera ASMI Parallel II IP Core.
>
> s/bindinds/bindings/
>
>>
>> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>> ---
>> .../devicetree/bindings/mtd/altera-asmip2.txt | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
>> new file mode 100644
>> index 0000000..3380366
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
>> @@ -0,0 +1,22 @@
>> +* Altera ASMI Parallel II IP Core
>> +
>> +Required properties:
>> +- compatible : Should be "altr,asmi_parallel2".
>
> s/_/-/
>
>> +- reg : A tuple consisting of a physical address and length.
>> +
>> +Optional subnodes:
>> +Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.
>
> But this is not a general purpose SPI controller?


The component is a general pupose SPI controller, but this driver
expects a spi-nor device to be connected to it. As such I wonder if the
compatible string should be "altr,asmi-parallel2-spi-nor".


>
>> +- reg : chip select value
>> +- label : optional user friendly label
>> +
>> +Example:
>> +
>> +qspi: spi@a0001000 {
>> + compatible = "altr,asmi_parallel2";
>> + reg = <0xa0001000 0x10>;
>> +
>> + flash@0 {
>
> This should have a compatible.
>
>> + reg = <0>;
>> + label = "FPGA Image";
>> + };

Since I have no way to test multiple flash chips, it might
be simpler to not specify any subnodes.

>> +};
>> --
>> 2.7.4
>>
>

\
 
 \ /
  Last update: 2017-08-14 18:39    [W:0.079 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site