lkml.org 
[lkml]   [2017]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 10/13] ARM: dts: rockchip: add saradc support for rv1108
From
Date
Hi Heiko:


On 2017年08月13日 20:13, Heiko Stuebner wrote:
> Hi Andy,
>
> Am Freitag, 11. August 2017, 11:46:51 CEST schrieb Andy Yan:
>> Add saradc device tree node for rv1108 soc
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>>
>> + adc: adc@1038c000 {
>> + compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
>> + reg = <0x1038c000 0x100>;
>> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> + #io-channel-cells = <1>;
>> + io-channel-ranges;
> What do you need the io-channel-ranges for?
> I.e. according to the documenation it is meant for when the adc is also
> a "bus node" and has children that should inherit channels from it.
>
> In all saradc uses so far we only have separate nodes referencing the
> adc controller (like adc-keys etc), so this does not look like it is needed?

Sorry, I just copied it from the downstream dts. After checked with
David, he suggested that we could remove it.
>
>
> Heiko
>
>
>
>


\
 
 \ /
  Last update: 2017-08-14 03:43    [W:0.069 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site