lkml.org 
[lkml]   [2017]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] parport_pc: use pr_cont
Date
From: Mikulas Patocka <mpatocka@redhat.com>

The kernel adds newline automatically between printk calls, we must use
pr_cont if we want multiple printk strings on the same line.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
drivers/parport/parport_pc.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 5548193..489492b 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1083,9 +1083,9 @@ static void show_parconfig_winbond(int io, int key)
printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
(cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
if ((cr74 & 0x07) > 3)
- printk("dma=none\n");
+ pr_cont("dma=none\n");
else
- printk("dma=%d\n", cr74 & 0x07);
+ pr_cont("dma=%d\n", cr74 & 0x07);
printk(KERN_INFO
"Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
irqtypes[crf0>>7], (crf0>>3)&0x0f);
@@ -1685,14 +1685,14 @@ static int parport_ECP_supported(struct parport *pb)
pb->base, config, configb);
printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
if ((configb >> 3) & 0x07)
- printk("%d", intrline[(configb >> 3) & 0x07]);
+ pr_cont("%d", intrline[(configb >> 3) & 0x07]);
else
- printk("<none or set by other means>");
- printk(" dma=");
+ pr_cont("<none or set by other means>");
+ pr_cont(" dma=");
if ((configb & 0x03) == 0x00)
- printk("<none or set by other means>\n");
+ pr_cont("<none or set by other means>\n");
else
- printk("%d\n", configb & 0x07);
+ pr_cont("%d\n", configb & 0x07);
}

/* Go back to mode 000 */
@@ -2399,8 +2399,8 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
"parport_pc: ITE 8872 parallel port: io=0x%X",
ite8872_lpt);
if (irq != PARPORT_IRQ_NONE)
- printk(", irq=%d", irq);
- printk("\n");
+ pr_cont(", irq=%d", irq);
+ pr_cont("\n");
return 1;
}

@@ -2581,10 +2581,10 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
printk(KERN_INFO
"parport_pc: VIA parallel port: io=0x%X", port1);
if (irq != PARPORT_IRQ_NONE)
- printk(", irq=%d", irq);
+ pr_cont(", irq=%d", irq);
if (dma != PARPORT_DMA_NONE)
- printk(", dma=%d", dma);
- printk("\n");
+ pr_cont(", dma=%d", dma);
+ pr_cont("\n");
return 1;
}

--
1.9.1
\
 
 \ /
  Last update: 2017-08-12 23:46    [W:0.242 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site