lkml.org 
[lkml]   [2017]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 2/8] iommu/mediatek: Add mt2712 IOMMU support
From
Date
On 11/08/17 10:56, Yong Wu wrote:
> The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
> Short-descriptor like mt8173, and most of the HW registers are the
> same.
>
> The difference is that there are 2 M4U HWs in mt2712 while there's
> only one in mt8173. The purpose of 2 M4U HWs is for balance the
> bandwidth.

Heh, I never imagined that theoretical argument I made against global
data in the original driver would become reality so soon :D

> Normally if there are 2 M4U HWs, there should be 2 iommu domains,
> each M4U has a iommu domain.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> This patch also include a minor issue:
> suspend while there is no iommu client. it will hang because
> there is no iommu domain at that time.
> ---
> drivers/iommu/mtk_iommu.c | 48 ++++++++++++++++++++++++++++++++---------------
> drivers/iommu/mtk_iommu.h | 7 +++++++
> drivers/memory/mtk-smi.c | 40 ++++++++++++++++++++++++++++++++++++---
> 3 files changed, 77 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 91c6d36..da6cedb 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -54,7 +54,9 @@
>
> #define REG_MMU_CTRL_REG 0x110
> #define F_MMU_PREFETCH_RT_REPLACE_MOD BIT(4)
> +/* The TF-protect-select is bit[5:4] in mt2712 while it's bit[6:5] in mt8173.*/
> #define F_MMU_TF_PROTECT_SEL(prot) (((prot) & 0x3) << 5)
> +#define F_MMU_TF_PROT_SEL(prot) (((prot) & 0x3) << 4)

In my opinion PROTECT vs. PROT here is too confusing for its own good...

> #define REG_MMU_IVRP_PADDR 0x114
> #define F_MMU_IVRP_PA_SET(pa, ext) (((pa) >> 1) | ((!!(ext)) << 31))
> @@ -301,10 +303,6 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
> data->m4u_dom = NULL;
> return ret;
> }
> - } else if (data->m4u_dom != dom) {
> - /* All the client devices should be in the same m4u domain */
> - dev_err(dev, "try to attach into the error iommu domain\n");
> - return -EPERM;
> }
>
> mtk_iommu_config(data, dev, true);
> @@ -464,8 +462,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> return ret;
> }
>
> - regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
> - F_MMU_TF_PROTECT_SEL(2);
> + if (data->m4u_type == M4U_MT8173) {
> + regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
> + F_MMU_TF_PROTECT_SEL(2);
> + } else {
> + regval = F_MMU_TF_PROT_SEL(2);

...and it would be a bit more obvious to just use
F_MMU_TF_PROTECT_SEL(2) >> 1 here (with the comment from above).
Alternatively, the really bullet-proof option would be something like:

#define F_MMU_TF_PROTECT_SEL_SHIFT(data) \
((data)->m4u_type == MT2172 ? 4 : 5)
#define F_MMU_TF_PROTECT_SEL(prot, data) \
((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))

> + }
> writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
>
> regval = F_L2_MULIT_HIT_EN |
> @@ -487,9 +489,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>
> writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
> data->base + REG_MMU_IVRP_PADDR);
> -
> writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
> - writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
> +
> + /* It's MISC control register whose default value is ok except mt8173.*/
> + if (data->m4u_type == M4U_MT8173)
> + writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
>
> if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> dev_name(data->dev), (void *)data)) {
> @@ -521,6 +525,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> if (!data)
> return -ENOMEM;
> data->dev = dev;
> + data->m4u_type = (enum mtk_iommu_type)of_device_get_match_data(dev);
>
> /* Protect memory. HW will access here while translation fault.*/
> protect = devm_kzalloc(dev, MTK_PROTECT_PA_ALIGN * 2, GFP_KERNEL);
> @@ -554,6 +559,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> for (i = 0; i < larb_nr; i++) {
> struct device_node *larbnode;
> struct platform_device *plarbdev;
> + unsigned int id;

Strictly, this should be u32...

>
> larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i);
> if (!larbnode)
> @@ -562,6 +568,10 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> if (!of_device_is_available(larbnode))
> continue;
>
> + ret = of_property_read_u32(larbnode, "mediatek,larb-id", &id);
> + if (ret)/* The id is consecutive if there is no this property */
> + id = i;

...but wouldn't it make more sense for the SMI driver to handle this?
Admittedly it looks like only this driver knows the default IDs thanks
to the ordering of the phandle args, but the SMI driver could at least
initialise larb->larbid to some sentinel value which could be detected
and replaced with i here.

> +
> plarbdev = of_find_device_by_node(larbnode);
> if (!plarbdev) {
> plarbdev = of_platform_device_create(
> @@ -572,7 +582,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> return -EPROBE_DEFER;
> }
> }
> - data->smi_imu.larb_imu[i].dev = &plarbdev->dev;
> + data->smi_imu.larb_imu[id].dev = &plarbdev->dev;

Changing the way the larb_imu array is indexed also seems to create a
worrying inconsistency with mtk_iommu_v1.

> component_match_add_release(dev, &match, release_of,
> compare_of, larbnode);
> @@ -640,8 +650,6 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> struct mtk_iommu_suspend_reg *reg = &data->reg;
> void __iomem *base = data->base;
>
> - writel_relaxed(data->m4u_dom->cfg.arm_v7s_cfg.ttbr[0],
> - base + REG_MMU_PT_BASE_ADDR);
> writel_relaxed(reg->standard_axi_mode,
> base + REG_MMU_STANDARD_AXI_MODE);
> writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
> @@ -650,15 +658,19 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
> writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
> base + REG_MMU_IVRP_PADDR);
> + if (data->m4u_dom)
> + writel(data->m4u_dom->cfg.arm_v7s_cfg.ttbr[0],
> + base + REG_MMU_PT_BASE_ADDR);
> return 0;
> }
>
> -const struct dev_pm_ops mtk_iommu_pm_ops = {
> +static const struct dev_pm_ops mtk_iommu_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(mtk_iommu_suspend, mtk_iommu_resume)
> };
>
> static const struct of_device_id mtk_iommu_of_ids[] = {
> - { .compatible = "mediatek,mt8173-m4u", },
> + { .compatible = "mediatek,mt2712-m4u", .data = (void *)M4U_MT2712},
> + { .compatible = "mediatek,mt8173-m4u", .data = (void *)M4U_MT8173},
> {}
> };
>
> @@ -667,16 +679,20 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> .remove = mtk_iommu_remove,
> .driver = {
> .name = "mtk-iommu",
> - .of_match_table = mtk_iommu_of_ids,
> + .of_match_table = of_match_ptr(mtk_iommu_of_ids),
> .pm = &mtk_iommu_pm_ops,
> }
> };
>
> static int mtk_iommu_init_fn(struct device_node *np)
> {
> + static bool init_done;
> int ret;
> struct platform_device *pdev;
>
> + if (init_done)
> + return 0;
> +

Actually, you can simply get rid of the whole init_fn now - the
IOMMU_OF_DECLARE() table only remains as a way to identify built-in
drivers for the probe-deferral decision. Hopefully the dodgy-looking
forced creation of plarbdev in probe could go away as well.

> pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
> if (!pdev)
> return -ENOMEM;
> @@ -686,8 +702,10 @@ static int mtk_iommu_init_fn(struct device_node *np)
> pr_err("%s: Failed to register driver\n", __func__);
> return ret;
> }
> + init_done = true;
>
> return 0;
> }
>
> -IOMMU_OF_DECLARE(mtkm4u, "mediatek,mt8173-m4u", mtk_iommu_init_fn);
> +IOMMU_OF_DECLARE(mt8173m4u, "mediatek,mt8173-m4u", mtk_iommu_init_fn);
> +IOMMU_OF_DECLARE(mt2712m4u, "mediatek,mt2712-m4u", mtk_iommu_init_fn);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index c06cc91..cd729a3 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -34,6 +34,12 @@ struct mtk_iommu_suspend_reg {
> u32 int_main_control;
> };
>
> +enum mtk_iommu_type {
> + M4U_MT2701,
> + M4U_MT2712,
> + M4U_MT8173,
> +};
> +
> struct mtk_iommu_domain;
>
> struct mtk_iommu_data {
> @@ -50,6 +56,7 @@ struct mtk_iommu_data {
> bool tlb_flush_active;
>
> struct iommu_device iommu;
> + enum mtk_iommu_type m4u_type;
> };
>
> static inline int compare_of(struct device *dev, void *data)
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 13f8c45..ec06d2b 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -23,7 +23,10 @@
> #include <soc/mediatek/smi.h>
> #include <dt-bindings/memory/mt2701-larb-port.h>
>
> +/* mt8173 */
> #define SMI_LARB_MMU_EN 0xf00
> +
> +/* mt2701 */
> #define REG_SMI_SECUR_CON_BASE 0x5c0
>
> /* every register control 8 port, register offset 0x4 */
> @@ -41,6 +44,10 @@
> /* mt2701 domain should be set to 3 */
> #define SMI_SECUR_CON_VAL_DOMAIN(id) (0x3 << ((((id) & 0x7) << 2) + 1))
>
> +/* mt2712 */
> +#define SMI_LARB_NONSEC_CON(id) (0x380 + (id * 4))
> +#define F_MMU_EN BIT(0)
> +
> struct mtk_smi_larb_gen {
> bool need_larbid;
> int port_in_larb[MTK_LARB_NR_MAX + 1];
> @@ -149,7 +156,7 @@ void mtk_smi_larb_put(struct device *larbdev)
> struct mtk_smi_iommu *smi_iommu = data;
> unsigned int i;
>
> - for (i = 0; i < smi_iommu->larb_nr; i++) {
> + for (i = 0; i < MTK_LARB_NR_MAX; i++) {

This initially looked suspicious, but I guess it's related to the
earlier change to indexing. As a result we seem to have a bit of a
redundant mess where some things are using larb->larbid and others are
relying on inferring it from the index in larb_imu.

I'm not sure whether it would end up better to use larbid consistently
everywhere, or to convert everything to make make larb_imu officially a
sparse array indexed by ID (and thus remove smi_iommu->larb_nr and
larb->larbid), but a weird mix of both is not a great idea.

> if (dev == smi_iommu->larb_imu[i].dev) {
> /* The 'mmu' may be updated in iommu-attach/detach. */
> larb->mmu = &smi_iommu->larb_imu[i].mmu;
> @@ -159,13 +166,28 @@ void mtk_smi_larb_put(struct device *larbdev)
> return -ENODEV;
> }
>
> -static void mtk_smi_larb_config_port(struct device *dev)
> +static void mtk_smi_larb_config_port_mt8173(struct device *dev)
> {
> struct mtk_smi_larb *larb = dev_get_drvdata(dev);
>
> writel(*larb->mmu, larb->base + SMI_LARB_MMU_EN);
> }
>
> +static void mtk_smi_larb_config_port_mt2712(struct device *dev)
> +{
> + struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> + u32 reg;
> + int i;
> +
> + for (i = 0; i < 32; i++) {
> + if (*larb->mmu & BIT(i)) {

Seeing this immediately make me think of:

unsigned long enable = *larb->mmu;

for_each_set_bit(i, &enable, 32) {
...
}

but maybe that's overkill :/

Robin.

> + reg = readl_relaxed(larb->base +
> + SMI_LARB_NONSEC_CON(i));
> + reg |= F_MMU_EN;
> + writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
> + }
> + }
> +}
>
> static void mtk_smi_larb_config_port_gen1(struct device *dev)
> {
> @@ -211,7 +233,11 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
>
> static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
> /* mt8173 do not need the port in larb */
> - .config_port = mtk_smi_larb_config_port,
> + .config_port = mtk_smi_larb_config_port_mt8173,
> +};
> +
> +static const struct mtk_smi_larb_gen mtk_smi_larb_mt2712 = {
> + .config_port = mtk_smi_larb_config_port_mt2712,
> };
>
> static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
> @@ -232,6 +258,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
> .compatible = "mediatek,mt2701-smi-larb",
> .data = &mtk_smi_larb_mt2701
> },
> + {
> + .compatible = "mediatek,mt2712-smi-larb",
> + .data = &mtk_smi_larb_mt2712
> + },
> {}
> };
>
> @@ -318,6 +348,10 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
> .compatible = "mediatek,mt2701-smi-common",
> .data = (void *)MTK_SMI_GEN1
> },
> + {
> + .compatible = "mediatek,mt2712-smi-common",
> + .data = (void *)MTK_SMI_GEN2
> + },
> {}
> };
>
>

\
 
 \ /
  Last update: 2017-08-11 19:25    [W:1.342 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site