lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] net: stmmac: Use the right logging function in stmmac_mdio_register
Date
Currently, the function stmmac_mdio_register() is only used by
stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus
and probe information about the PHY. As this function is called before
calling register_netdev(), all messages logged from stmmac_mdio_register
are prefixed by "(unnamed net_device)". The goal of netdev_info or
netdev_err is to dump useful infos about a net_device, when this data
structure is partially initialized, there is no point for using these
functions.

This commit fixes the issue by replacing all netdev_*() by the
corresponding dev_*() function for logging. The last netdev_info is
replaced by phy_attached_info(), as a valid phydev can be used at this
point.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
---

Changes in v2:
- Replaced dev_info() by phy_attached_print()
- Simplified message because informations were redudant
- Updated commit message

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index db157a47000c..e0fbf8657103 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -204,6 +204,7 @@ int stmmac_mdio_register(struct net_device *ndev)
struct stmmac_priv *priv = netdev_priv(ndev);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
struct device_node *mdio_node = priv->plat->mdio_node;
+ struct device *dev = ndev->dev.parent;
int addr, found;

if (!mdio_bus_data)
@@ -237,7 +238,7 @@ int stmmac_mdio_register(struct net_device *ndev)
else
err = mdiobus_register(new_bus);
if (err != 0) {
- netdev_err(ndev, "Cannot register the MDIO bus\n");
+ dev_err(dev, "Cannot register the MDIO bus\n");
goto bus_register_fail;
}

@@ -285,14 +286,14 @@ int stmmac_mdio_register(struct net_device *ndev)
irq_str = irq_num;
break;
}
- netdev_info(ndev, "PHY ID %08x at %d IRQ %s (%s)%s\n",
- phydev->phy_id, addr, irq_str, phydev_name(phydev),
- act ? " active" : "");
+ phy_attached_print(phydev, "PHY ID %08x IRQ %s %s\n",
+ phydev->phy_id, irq_str,
+ act ? " active" : "");
found = 1;
}

if (!found && !mdio_node) {
- netdev_warn(ndev, "No PHY found\n");
+ dev_warn(dev, "No PHY found\n");
mdiobus_unregister(new_bus);
mdiobus_free(new_bus);
return -ENODEV;
--
2.11.0
\
 
 \ /
  Last update: 2017-08-10 09:39    [W:0.036 / U:1.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site