lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] mips: Fix issues in backtraces
Date
From: Corey Minyard <cminyard@mvista.com>

I saw two problems when doing backtraces:

The compiler was putting a "fast return" at the top of some
functions, before it set up the frame. The backtrace code
would stop when it saw a jump instruction, so it would never
get to the stack frame setup and would thus misinterpret it.
To fix this, don't look for jump instructions until the
frame setup has been seen.

The assembly code here is:

ffffffff80b885a0 <serial8250_handle_irq>:
ffffffff80b885a0: c8a00003 bbit0 a1,0x0,ffffffff80b885b0 <serial8250_handle_irq+0x10>
ffffffff80b885a4: 0000102d move v0,zero
ffffffff80b885a8: 03e00008 jr ra
ffffffff80b885ac: 00000000 nop
ffffffff80b885b0: 67bdffd0 daddiu sp,sp,-48
ffffffff80b885b4: ffb00008 sd s0,8(sp)

The second problem was the compiler was putting the last
instruction of the frame save in the delay slot of the
jump instruction. If it saved the RA in there, the
backtrace could would miss it and misinterpret the frame.
To fix this, make sure to process the instruction after
the first jump seen.

The assembly code for this is:

ffffffff80806fd0 <plat_irq_dispatch>:
ffffffff80806fd0: 67bdffd0 daddiu sp,sp,-48
ffffffff80806fd4: ffb30020 sd s3,32(sp)
ffffffff80806fd8: 24130018 li s3,24
ffffffff80806fdc: ffb20018 sd s2,24(sp)
ffffffff80806fe0: 3c12811c lui s2,0x811c
ffffffff80806fe4: ffb10010 sd s1,16(sp)
ffffffff80806fe8: 3c11811c lui s1,0x811c
ffffffff80806fec: ffb00008 sd s0,8(sp)
ffffffff80806ff0: 3c10811c lui s0,0x811c
ffffffff80806ff4: 08201c03 j ffffffff8080700c <plat_irq_dispa
tch+0x3c>
ffffffff80806ff8: ffbf0028 sd ra,40(sp)

Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
arch/mips/kernel/process.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 5351e1f..a1d930a 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -349,6 +349,7 @@ static int get_frame_info(struct mips_frame_info *info)
union mips_instruction insn, *ip, *ip_end;
const unsigned int max_insns = 128;
unsigned int i;
+ bool saw_jump = false;

info->pc_offset = -1;
info->frame_size = 0;
@@ -370,9 +371,6 @@ static int get_frame_info(struct mips_frame_info *info)
insn.word = ip->word;
}

- if (is_jump_ins(&insn))
- break;
-
if (!info->frame_size) {
if (is_sp_move_ins(&insn))
{
@@ -396,10 +394,28 @@ static int get_frame_info(struct mips_frame_info *info)
info->frame_size = - ip->i_format.simmediate;
}
continue;
+ } else if (!saw_jump && is_jump_ins(ip)) {
+ /*
+ * If we see a jump instruction, we are finished
+ * with the frame save.
+ *
+ * Some functions can have a shortcut return at
+ * the beginning of the function, so don't start
+ * looking for jump instruction until we see the
+ * frame setup.
+ *
+ * The RA save instruction can get put into the
+ * delay slot of the jump instruction, so look
+ * at the next instruction, too.
+ */
+ saw_jump = true;
+ continue;
}
if (info->pc_offset == -1 &&
is_ra_save_ins(&insn, &info->pc_offset))
break;
+ if (saw_jump)
+ break;
}
if (info->frame_size && info->pc_offset >= 0) /* nested */
return 0;
--
2.7.4
\
 
 \ /
  Last update: 2017-08-10 20:29    [W:0.041 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site