lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v6] wlcore: add missing nvs file name info for wilink8
* Reizer, Eyal <eyalr@ti.com> [170810 07:24]:
> > >
> >
> > Sure, just want to make sure we are not trying to add work around just for
> > A couple of faulty devices.
> >
> > > > I have verified using a couple of com6 modules with an am335x-evm and
> > > they had mac addresses read ok.
> > >
> > > Sounds like there are multiple variants of the wl12xx
> > > available then.
> > >
> > I am trying to find out internally if there is a possibility that there were
> > devices
> > Produced in the past where the internal fuses were not programmed with a
> > valid
> > Address before being assembled into the modules.
> >
>
> Seems like MAC address for wilink6/7 was added to devices that were produced around Q3 of 2010
> In case you still have this omap3-evm up and can just do a quick check for me as I don't have this board, can you try using the following command:
>
> cat /sys/bus/platform/drivers/wl12xx_driver/wl12xx.0.auto/hw_pg_ver
>
> and let me know what the output you get is?

Sure, my omap3-evm has hw_pg_ver set to 3.

Regards,

Tony

\
 
 \ /
  Last update: 2017-08-10 19:27    [W:0.102 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site