lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi file
* Tony Lindgren <tony@atomide.com> [170613 22:00]:
> * Enric Balletbo Serra <eballetbo@gmail.com> [170613 02:12]:
> > Hi Tony,
> >
> > 2017-06-13 9:35 GMT+02:00 Tony Lindgren <tony@atomide.com>:
> > > * Enric Balletbo i Serra <enric.balletbo@collabora.com> [170612 14:28]:
> > >> The interrupt for power button is static data that comes from the
> > >> datasheet, there is no reason to need to define this value on every
> > >> board so seams reasonable put this information into the common tps65217
> > >> file.
> > >
> > > I think there's a problem with these patches where we no longer know
> > > if the interrupts are wired up on a board. For example, if the USB PHY
> > > VBUS interrupt is not connected, the phy driver needs poll the
> > > cable state.
> > >
> >
> > Hmm, the tps65217 doesn't have a USB PHY like others tps, so not sure
> > how could affect this patch. Did you see this issue in any board that
> > uses tps65217 or any am335x based board which commonly uses this pmic?
>
> Oh sorry I misread your patch. I thought you're removing
> the interrupts from dts, but you're just moving the dts entries
> to the common dtsi file :) So seems just fine with me.

Applying patches 1 and 2 of this series into omap-for-v4.14/dt
thanks.

Regards,

Tony

\
 
 \ /
  Last update: 2017-08-10 18:25    [W:0.584 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site