lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] usb: xhci: Handle USB transaction error on address command
Date
Xhci driver handles USB transaction errors on transfer events,
but transaction errors are possible on address device command
completion events as well.

The xHCI specification (section 4.6.5) says: A USB Transaction
Error Completion Code for an Address Device Command may be due
to a Stall response from a device. Software should issue a Disable
Slot Command for the Device Slot then an Enable Slot Command to
recover from this error.

The related discussion threads can be found through below links.

http://marc.info/?l=linux-usb&m=149362010728921&w=2
http://marc.info/?l=linux-usb&m=149252752825755&w=2

This patch set includes some fixes in xhci_disable_slot() as well
which will be used to handle USB transaction error on address
command.

---
Change log:

v1->v2:
- Add 4 fixes in xhci_disable_slot which will be used
to handle USB transaction error on address command.

v2->v3:
- Add checking virt dev for test mode in PATCH 1/5.

Lu Baolu (5):
usb: xhci: Disable slot even virt-dev is null
usb: xhci: Fix potential memory leak in xhci_disable_slot()
usb: xhci: Fix memory leak when xhci_disable_slot() returns error
usb: xhci: Return error when host is dead in xhci_disable_slot()
usb: xhci: Handle USB transaction error on address command

drivers/usb/host/xhci-hub.c | 5 ++++-
drivers/usb/host/xhci.c | 52 ++++++++++++++++++---------------------------
drivers/usb/host/xhci.h | 3 +--
3 files changed, 26 insertions(+), 34 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2017-08-11 04:45    [W:0.088 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site