lkml.org 
[lkml]   [2017]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] remoteproc: Add remote processor coredump support
From
Date
On 6/21/2017 1:54 PM, Suman Anna wrote:
> Hi Sarang,

Hi Sumant,

>
>> Thanks for reviewing the patch.> >>
>>> On 06/14/2017 01:06 PM, Sarangdhar Joshi wrote:
>>>> The remoteproc framework shuts down and immediately restarts the
>>>> remote processor after fatal events (such as when remote crashes)
>>>> during the recovery path.
>>>
>>> This is the case in production systems, but your statement is not
>>> entirely accurate. Have you looked at the remoteproc debugfs
>>> 'recovery' variable? You can actually halt the recovery and can do
>>> some debugging analysis at the point of failure.
>>
>> Glad you pointed this out. I wasn't aware of this 'recovery' debug
>> feature. However it looks like that feature would be good only for live
>> debugging. Whereas, the coredump support that this patch adds, would
>> also be useful for offline debugging / analysis.
>>
>>>
>>> > This makes it lose the state of the
>>>> remote firmware at the point of failure, making it harder to debug
>>>> such events.
>>>>
>>>> This patch introduces a mechanism for extracting the memory
>>>> contents(where the firmware was loaded) after the remote has stopped
>>>> and before the restart sequence has begun in the recovery path. The
>>>> remoteproc framework stores the dump segments information and uses
>>>> devcoredump interface to read the memory contents for each of the
>>>> segments.
>>>>
>>>> The devcoredump device provides a sysfs interface
>>>> /sys/class/remoteproc/remoteproc*/devcoredump/data that could be used
>>>> to read this memory contents. This device will be removed either by
>>>> writing to the data node or after a timeout of 5 minutes as defined in
>>>> the devcoredump.c. This feature could be disabled by writing 1 to the
>>>> disabled file under /sys/class/devcoredump/.
>>>
>>> Nice concept using the devcoredump, but need some changes to be
>>> generic. Please see below based on my quick review.
>>
>> Thanks, will try to make the change as generic as possible.
>>
>>>
>>>>
>>>> Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
>>>> ---
>>>> drivers/remoteproc/qcom_common.c | 42 ++++++++
>>>> drivers/remoteproc/qcom_common.h | 2 +
>>>> drivers/remoteproc/remoteproc_core.c | 168
>>>> +++++++++++++++++++++++++++++++
>>>> drivers/remoteproc/remoteproc_internal.h | 11 ++
>>>> drivers/soc/qcom/mdt_loader.c | 3 +-
>>>> include/linux/remoteproc.h | 21 ++++
>>>> include/linux/soc/qcom/mdt_loader.h | 1 +
>>>
>>> Please add a cover-letter and summarize your changes when submitting
>>> multiple patches. Also, split this patch to add the framework to
>>> remoteproc core first and then adding the support to your platform
>>> driver in separate patch(es).
>>
>> Sure, will do that. I did enable this support for our platform in a
>> separate patch (2/2), however, missed some common functions to move to
>> separate patch(es).
>
> Yeah, the other qcom pieces do not belong to the remoteproc core.
>
>>
>>>
>>>> 7 files changed, 247 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/remoteproc/qcom_common.c
>>>> b/drivers/remoteproc/qcom_common.c
>>>> index bb90481..c68368a 100644
>>>> --- a/drivers/remoteproc/qcom_common.c
>>>> +++ b/drivers/remoteproc/qcom_common.c
>>>> @@ -20,6 +20,7 @@
>>>> #include <linux/module.h>
>>>> #include <linux/remoteproc.h>
>>>> #include <linux/rpmsg/qcom_smd.h>
>>>> +#include <linux/soc/qcom/mdt_loader.h>
>>>> #include "remoteproc_internal.h"
>>>> #include "qcom_common.h"
>>>> @@ -45,6 +46,47 @@ struct resource_table
>>>> *qcom_mdt_find_rsc_table(struct rproc *rproc,
>>>> }
>>>> EXPORT_SYMBOL_GPL(qcom_mdt_find_rsc_table);
>>>> +/**
>>>> + * qcom_register_dump_segments() - register segments with remoteproc
>>>> + * framework for coredump collection
>>>> + *
>>>> + * @rproc: remoteproc handle
>>>> + * @fw: firmware header
>>>> + *
>>>> + * returns 0 on success, negative error code otherwise.
>>>> + */
>>>> +int qcom_register_dump_segments(struct rproc *rproc,
>>>> + const struct firmware *fw)
>>>> +{
>>>> + struct rproc_dump_segment *segment;
>>>> + const struct elf32_phdr *phdrs;
>>>> + const struct elf32_phdr *phdr;
>>>> + const struct elf32_hdr *ehdr;
>>>> + int i;
>>>> +
>>>> + ehdr = (struct elf32_hdr *)fw->data;
>>>> + phdrs = (struct elf32_phdr *)(ehdr + 1);
>>>> +
>>>> + for (i = 0; i < ehdr->e_phnum; i++) {
>>>> + phdr = &phdrs[i];
>>>> +
>>>> + if (!mdt_phdr_valid(phdr))
>>>> + continue;
>>>> +
>>>> + segment = kzalloc(sizeof(*segment), GFP_KERNEL);
>>>> + if (!segment)
>>>> + return -ENOMEM;
>>>> +
>>>> + segment->da = phdr->p_paddr;
>>>> + segment->size = phdr->p_memsz;
>>>> +
>>>> + list_add_tail(&segment->node, &rproc->dump_segments);
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(qcom_register_dump_segments);
>
> So looking at this again, this only captures the segments dictated by
> your ELF program headers. So, will this be capturing the data contents
> like stack and heap.

Yes, it only captures the segments currently, and no stack or heap. How
does non-elf cases provide stack or heap data? We certainly don't have
this info in the ELF header.

>
>>>> +
>>>> static int smd_subdev_probe(struct rproc_subdev *subdev)
>>>> {
>>>> struct qcom_rproc_subdev *smd = to_smd_subdev(subdev);
>>>> diff --git a/drivers/remoteproc/qcom_common.h
>>>> b/drivers/remoteproc/qcom_common.h
>>>> index db5c826..f658da9 100644
>>>> --- a/drivers/remoteproc/qcom_common.h
>>>> +++ b/drivers/remoteproc/qcom_common.h
>>>> @@ -16,6 +16,8 @@ struct resource_table
>>>> *qcom_mdt_find_rsc_table(struct rproc *rproc,
>>>> const struct firmware *fw,
>>>> int *tablesz);
>>>> +int qcom_register_dump_segments(struct rproc *rproc, const struct
>>>> firmware *fw);
>>>> +
>>>> void qcom_add_smd_subdev(struct rproc *rproc, struct
>>>> qcom_rproc_subdev *smd);
>>>> void qcom_remove_smd_subdev(struct rproc *rproc, struct
>>>> qcom_rproc_subdev *smd);
>>>> diff --git a/drivers/remoteproc/remoteproc_core.c
>>>> b/drivers/remoteproc/remoteproc_core.c
>>>> index 369ba0f..23bf452 100644
>>>> --- a/drivers/remoteproc/remoteproc_core.c
>>>> +++ b/drivers/remoteproc/remoteproc_core.c
>>>> @@ -33,6 +33,7 @@
>>>> #include <linux/firmware.h>
>>>> #include <linux/string.h>
>>>> #include <linux/debugfs.h>
>>>> +#include <linux/devcoredump.h>
>>>> #include <linux/remoteproc.h>
>>>> #include <linux/iommu.h>
>>>> #include <linux/idr.h>
>>>> @@ -93,6 +94,21 @@ static int rproc_iommu_fault(struct iommu_domain
>>>> *domain, struct device *dev,
>>>> return -ENOSYS;
>>>> }
>>>> +/**
>>>> + * rproc_unregister_segments() - clean up the segment entries from
>>>> + * dump_segments list
>>>> + * @rproc: the remote processor handle
>>>> + */
>>>> +static void rproc_unregister_segments(struct rproc *rproc)
>>>> +{
>>>> + struct rproc_dump_segment *entry, *tmp;
>>>> +
>>>> + list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
>>>> + list_del(&entry->node);
>>>> + kfree(entry);
>>>> + }
>>>> +}
>>>> +
>>>> static int rproc_enable_iommu(struct rproc *rproc)
>>>> {
>>>> struct iommu_domain *domain;
>>>> @@ -867,6 +883,12 @@ static int rproc_start(struct rproc *rproc,
>>>> const struct firmware *fw)
>>>> return ret;
>>>> }
>>>> + ret = rproc_register_segments(rproc, fw);
>>>> + if (ret) {
>>>> + dev_err(dev, "Failed to register coredump segments: %d\n",
>>>> ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> /*
>>>> * The starting device has been given the rproc->cached_table
>>>> as the
>>>> * resource table. The address of the vring along with the other
>>>> @@ -975,6 +997,7 @@ static int rproc_fw_boot(struct rproc *rproc,
>>>> const struct firmware *fw)
>>>> rproc->cached_table = NULL;
>>>> rproc->table_ptr = NULL;
>>>> + rproc_unregister_segments(rproc);
>>>> rproc_disable_iommu(rproc);
>>>> return ret;
>>>> }
>>>> @@ -1039,6 +1062,139 @@ static int rproc_stop(struct rproc *rproc)
>>>> return 0;
>>>> }
>>>> +static ssize_t rproc_coredump_dump(char *buffer, loff_t offset,
>>>> size_t count,
>>>> + void *data, size_t datalen)
>>>> +{
>>>> + struct rproc *rproc = (struct rproc *)data;
>>>> + struct rproc_dump_segment *segment;
>>>> + char *header = rproc->dump_header;
>>>> + bool out_of_range = true;
>>>> + size_t adj_offset;
>>>> + void *ptr;
>>>> +
>>>> + if (!count)
>>>> + return 0;
>>>> +
>>>> + if (offset < rproc->dump_header_size) {
>>>> + if (count > rproc->dump_header_size - offset)
>>>> + count = rproc->dump_header_size - offset;
>>>> +
>>>> + memcpy(buffer, header + offset, count);
>>>> + return count;
>>>> + }
>>>> +
>>>> + adj_offset = offset - rproc->dump_header_size;
>>>> +
>>>> + list_for_each_entry(segment, &rproc->dump_segments, node) {
>>>> + if (adj_offset < segment->size) {
>>>> + out_of_range = false;
>>>> + break;
>>>> + }
>>>> + adj_offset -= segment->size;
>>>> + }
>>>> +
>>>> + /* check whether it's the end of the list */
>>>> + if (out_of_range) {
>>>> + dev_info(&rproc->dev, "read offset out of range\n");
>>>> + return 0;
>>>> + }
>>>> +
>>>> + if (count > (segment->size - adj_offset))
>>>> + count = segment->size - adj_offset;
>>>> +
>>>> + ptr = rproc_da_to_va(rproc, segment->da, segment->size);
>>>> + if (!ptr) {
>>>> + dev_err(&rproc->dev, "segment addr outside memory range\n");
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + memcpy(buffer, ptr + adj_offset, count);
>>>> + return count;
>>>> +}
>>>> +
>>>> +/**
>>>> + * rproc_coredump_free() - complete the dump_complete completion
>>>> + * @data: rproc handle
>>>> + *
>>>> + * This callback will be called when there occurs a write to the
>>>> + * data node on devcoredump or after the devcoredump timeout.
>>>> + */
>>>> +static void rproc_coredump_free(void *data)
>>>> +{
>>>> + struct rproc *rproc = (struct rproc *)data;
>>>> +
>>>> + complete_all(&rproc->dump_complete);
>>>> +
>>>> + /*
>>>> + * We do not need to free the dump_header data here.
>>>> + * We already do it after completing dump_complete
>>>> + */
>>>> +}
>>>> +
>>>> +/**
>>>> + * rproc_coredump_add_header() - add the coredump header information
>>>> + * @rproc: rproc handle
>>>> + *
>>>> + * Returns 0 on success, negative errno otherwise.
>>>> + *
>>>> + * This function creates a devcoredump device associated with rproc
>>>> + * and registers the read() and free() callbacks with this device.
>>>> + */
>>>> +static int rproc_coredump_add_header(struct rproc *rproc)
>>>> +{
>>>> + struct rproc_dump_segment *entry;
>>>> + struct elf32_phdr *phdr;
>>>> + struct elf32_hdr *ehdr;
>>>> + int nsegments = 0;
>>>> + size_t offset;
>>>> +
>>>> + list_for_each_entry(entry, &rproc->dump_segments, node)
>>>> + nsegments++;
>>>> +
>>>> + rproc->dump_header_size = sizeof(*ehdr) + sizeof(*phdr) *
>>>> nsegments;
>>>> + ehdr = kzalloc(rproc->dump_header_size, GFP_KERNEL);
>>>> + rproc->dump_header = (char *)ehdr;
>>>> + if (!rproc->dump_header)
>>>> + return -ENOMEM;
>>>> +
>>>> + memcpy(ehdr->e_ident, ELFMAG, SELFMAG);
>>>> + ehdr->e_ident[EI_CLASS] = ELFCLASS32;
>>>> + ehdr->e_ident[EI_DATA] = ELFDATA2LSB;
>>>> + ehdr->e_ident[EI_VERSION] = EV_CURRENT;
>>>> + ehdr->e_ident[EI_OSABI] = ELFOSABI_NONE;
>>>> + ehdr->e_type = ET_CORE;
>>>> + ehdr->e_version = EV_CURRENT;
>>>> + ehdr->e_phoff = sizeof(*ehdr);
>>>> + ehdr->e_ehsize = sizeof(*ehdr);
>>>> + ehdr->e_phentsize = sizeof(*phdr);
>>>> + ehdr->e_phnum = nsegments;
>>>> +
>>>> + offset = rproc->dump_header_size;
>>>> + phdr = (struct elf32_phdr *)(ehdr + 1);
>>>> + list_for_each_entry(entry, &rproc->dump_segments, node) {
>>>> + phdr->p_type = PT_LOAD;
>>>> + phdr->p_offset = offset;
>>>> + phdr->p_vaddr = phdr->p_paddr = entry->da;
>>>> + phdr->p_filesz = phdr->p_memsz = entry->size;
>>>> + phdr->p_flags = PF_R | PF_W | PF_X;
>>>> + phdr->p_align = 0;
>>>> + offset += phdr->p_filesz;
>>>> + phdr++;
>>>> + }
>>>> +
>>>> + dev_coredumpm(&rproc->dev, NULL, (void *)rproc,
>>>> rproc->dump_header_size,
>>>
>>> Why are you passing NULL for the owner?

I see one local instance of this function where NULL is passed for the
owner parameter and I also wasn't sure if passing THIS_MODULE would be
needed since devcoredump does the get_device()/put_device() around
devcoredump's lifetime anyway.

>>>
>>>> + GFP_KERNEL, rproc_coredump_dump, rproc_coredump_free);
>>>> +
>>>> + wait_for_completion_interruptible(&rproc->dump_complete);
>>>
>>> Hmm, is this holding up the recovery? I see this is signaled only in
>>> rproc_coredump_free()? You are doing this inline during the recovery
>>> or am I missing something?
>>
>> Yes, that's right. The free() callback will complete the dump_complete
>> and then the rest of the recovery will proceed. This free() callback
>> gets called either when user writes to the .../devcoredump/data node or
>> devcoredump TIMEOUT (i.e. 5 mins) occurs. If CONFIG_DEV_COREDUMP is not
>> enabled, then this function will bailout without halting.
>
> OK, but this fundamentally requires that there's some userspace utility
> that needs to trigger the continuation of recovery. Granted that this
> only happens CONFIG_DEV_COREDUMP is enabled, but that is a global build
> flag and when enabled does it for all the platforms as well. 5 mins is a
> long time if there's no utility, and if this path is enabled by default
> in a common kernel, it definitely is not a desirable default behavior.
> What's the default behavior on individual coredumps when above is
> enabled.

The devcoredump users(e.g. fw-dbg.c) use the default timeout of 5 mins.
The wrapper function is usually called in the context of
schedule_work(), similar to what we have for rproc_crash_handler_work().

We can add a timeout tunable in devcoredump which userspace can modify,
if 5 mins is the concern. However, I don't know if it's okay to change
the default devcoredump timeout.

Also, how does the utility get to know that a remoteproc has
> crashed?

It would be through an udev event when the corresponding devcoredump
device is added.

>
>>
>>>
>>>> +
>>>> + /* clean up the resources */
>>>> + kfree(rproc->dump_header);
>>>> + rproc->dump_header = NULL;
>>>> + rproc_unregister_segments(rproc);
>>>> +
>>>> + return 0;
>>>> +}
>>>
>>> This is not generic, remoteproc core can support non-ELF images, and
>>> the choice of fw_ops is left to individual platform drivers. The dump
>>> logic is dependent on the particular format being used, and so
>>> whatever ELF coredump support you are adding should be added through a
>>> fw_ops. You can add a default one for regular ELFs, and platform
>>> drivers can always customized based on thier own fw_ops.
>>
>> That's a good point. I think something like below should work
>>
>> struct rproc_fw_ops {
>> ...
>> int (* rproc_coredump_add_header)(struct rproc);
>
> well, add_header is still narrow or confusing name for this. Adding the
> header is just one part of the coredump.

Any suggestions for naming? How about rproc_coredump_prepare()?

Thanks,
Sarang

>
> regards
> Suman
>
>> }
>>
>>>
>>>> +
>>>> /**
>>>> * rproc_trigger_recovery() - recover a remoteproc
>>>> * @rproc: the remote processor
>>>> @@ -1057,6 +1213,7 @@ int rproc_trigger_recovery(struct rproc *rproc)
>>>> dev_err(dev, "recovering %s\n", rproc->name);
>>>> + init_completion(&rproc->dump_complete);
>>>> init_completion(&rproc->crash_comp);
>>>> ret = mutex_lock_interruptible(&rproc->lock);
>>>> @@ -1070,6 +1227,13 @@ int rproc_trigger_recovery(struct rproc *rproc)
>>>> /* wait until there is no more rproc users */
>>>> wait_for_completion(&rproc->crash_comp);
>>>> + /* set up the coredump */
>>>> + ret = rproc_coredump_add_header(rproc);
>>>> + if (ret) {
>>>> + dev_err(dev, "setting up the coredump failed: %d\n", ret);
>>>> + goto unlock_mutex;
>>>> + }
>>>> +
>>>> /* load firmware */
>>>> ret = request_firmware(&firmware_p, rproc->firmware, dev);
>>>> if (ret < 0) {
>>>> @@ -1234,6 +1398,8 @@ void rproc_shutdown(struct rproc *rproc)
>>>> /* clean up all acquired resources */
>>>> rproc_resource_cleanup(rproc);
>>>> + rproc_unregister_segments(rproc);
>>>> +
>>>> rproc_disable_iommu(rproc);
>>>> /* Free the copy of the resource table */
>>>> @@ -1465,8 +1631,10 @@ struct rproc *rproc_alloc(struct device *dev,
>>>> const char *name,
>>>> INIT_LIST_HEAD(&rproc->traces);
>>>> INIT_LIST_HEAD(&rproc->rvdevs);
>>>> INIT_LIST_HEAD(&rproc->subdevs);
>>>> + INIT_LIST_HEAD(&rproc->dump_segments);
>>>> INIT_WORK(&rproc->crash_handler, rproc_crash_handler_work);
>>>> + init_completion(&rproc->dump_complete);
>>>> init_completion(&rproc->crash_comp);
>>>> rproc->state = RPROC_OFFLINE;
>>>> diff --git a/drivers/remoteproc/remoteproc_internal.h
>>>> b/drivers/remoteproc/remoteproc_internal.h
>>>> index 1e9e5b3..273b111 100644
>>>> --- a/drivers/remoteproc/remoteproc_internal.h
>>>> +++ b/drivers/remoteproc/remoteproc_internal.h
>>>> @@ -43,6 +43,8 @@ struct rproc_fw_ops {
>>>> int (*load)(struct rproc *rproc, const struct firmware *fw);
>>>> int (*sanity_check)(struct rproc *rproc, const struct firmware
>>>> *fw);
>>>> u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware
>>>> *fw);
>>>> + int (*register_segments)(struct rproc *rproc,
>>>> + const struct firmware *fw);
>>>> };
>>>> /* from remoteproc_core.c */
>>>> @@ -94,6 +96,15 @@ u32 rproc_get_boot_addr(struct rproc *rproc, const
>>>> struct firmware *fw)
>>>> }
>>>> static inline
>>>> +int rproc_register_segments(struct rproc *rproc, const struct
>>>> firmware *fw)
>>>> +{
>>>> + if (rproc->fw_ops->register_segments)
>>>> + return rproc->fw_ops->register_segments(rproc, fw);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static inline
>>>> int rproc_load_segments(struct rproc *rproc, const struct firmware
>>>> *fw)
>>>> {
>>>> if (rproc->fw_ops->load)
>>>> diff --git a/drivers/soc/qcom/mdt_loader.c
>>>> b/drivers/soc/qcom/mdt_loader.c
>>>> index b4a30fc..bd227bb 100644
>>>> --- a/drivers/soc/qcom/mdt_loader.c
>>>> +++ b/drivers/soc/qcom/mdt_loader.c
>>>> @@ -25,7 +25,7 @@
>>>> #include <linux/slab.h>
>>>> #include <linux/soc/qcom/mdt_loader.h>
>>>> -static bool mdt_phdr_valid(const struct elf32_phdr *phdr)
>>>> +bool mdt_phdr_valid(const struct elf32_phdr *phdr)
>>>> {
>>>> if (phdr->p_type != PT_LOAD)
>>>> return false;
>>>> @@ -38,6 +38,7 @@ static bool mdt_phdr_valid(const struct elf32_phdr
>>>> *phdr)
>>>> return true;
>>>> }
>>>> +EXPORT_SYMBOL_GPL(mdt_phdr_valid);
>>>> /**
>>>> * qcom_mdt_get_size() - acquire size of the memory region needed
>>>> to load mdt
>>>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>>>> index 81da495..73c2f69 100644
>>>> --- a/include/linux/remoteproc.h
>>>> +++ b/include/linux/remoteproc.h
>>>> @@ -382,6 +382,19 @@ enum rproc_crash_type {
>>>> };
>>>> /**
>>>> + * struct rproc_dump_segment - segment info from ELF header
>>>
>>> remoteproc core does have support for non-ELF firmwares as well.
>>
>> Yes, will modify the comment.
>>
>> Thanks,
>> Sarang
>>
>>>
>>>> + * @node: list node related to the rproc segment list
>>>> + * @da : address of the segment from the header
>>>
>>> additional whitepace/tab not required
>>
>> Will do.
>>
>>>
>>>> + * @size: size of the segment from the header
>>>> + */
>>>> +struct rproc_dump_segment {
>>>> + struct list_head node;
>>>> +
>>>
>>> no need of the blank line.
>>
>> will do.
>>
>>>
>>>> + phys_addr_t da;
>>>> + phys_addr_t size;
>>>> +};
>>>> +
>>>> +/**
>>>> * struct rproc - represents a physical remote processor device
>>>> * @node: list node of this rproc object
>>>> * @domain: iommu domain
>>>> @@ -412,6 +425,10 @@ enum rproc_crash_type {
>>>> * @table_ptr: pointer to the resource table in effect
>>>> * @cached_table: copy of the resource table
>>>> * @has_iommu: flag to indicate if remote processor is behind an MMU
>>>> + * @dump_segments: list of segments in the firmware
>>>> + * @dump_header: memory location that points to the header information
>>>> + * @dump_header_size: size of the allocated memory for header
>>>> + * @dump_complete: completion to track memory dump of segments
>>>> */
>>>> struct rproc {
>>>> struct list_head node;
>>>> @@ -444,6 +461,10 @@ struct rproc {
>>>> struct resource_table *cached_table;
>>>> bool has_iommu;
>>>> bool auto_boot;
>>>> + struct list_head dump_segments;
>>>> + void *dump_header;
>>>> + size_t dump_header_size;
>>>> + struct completion dump_complete;
>>>> };
>>>> /**
>>>> diff --git a/include/linux/soc/qcom/mdt_loader.h
>>>> b/include/linux/soc/qcom/mdt_loader.h
>>>> index ea021b3..33ea322 100644
>>>> --- a/include/linux/soc/qcom/mdt_loader.h
>>>> +++ b/include/linux/soc/qcom/mdt_loader.h
>>>> @@ -10,6 +10,7 @@
>>>> struct device;
>>>> struct firmware;
>>>> +bool mdt_phdr_valid(const struct elf32_phdr *phdr);
>>>> ssize_t qcom_mdt_get_size(const struct firmware *fw);
>>>> int qcom_mdt_load(struct device *dev, const struct firmware *fw,
>>>> const char *fw_name, int pas_id, void *mem_region,
>>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>>> linux-arm-msm" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>


--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-07-07 02:02    [W:0.258 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site