lkml.org 
[lkml]   [2017]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/5] dt-bindings: stm32-dma: Add property to handle STM32 DMAMUX
Date
This patch adds an optional property needed for STM32 DMA controller
addressed via STM32 DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
Version history:
v3:
* None
v2:
* Typo fix
---
---
Documentation/devicetree/bindings/dma/stm32-dma.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 4408af6..340c918 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -16,6 +16,9 @@ Optional properties:
- resets: Reference to a reset controller asserting the DMA controller
- st,mem2mem: boolean; if defined, it indicates that the controller supports
memory-to-memory transfer
+- st,dmamux: boolean; if defined, it indicates that the controller is behind a
+ DMA multiplexer. In that case, using dma instances doesn't work for DMA
+ clients. They have to use dma-router instances.

Example:

@@ -39,7 +42,7 @@ Example:
* DMA client

DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each
+described in the dma.txt file, using a four-cell specifier for each
channel: a phandle to the DMA controller plus the following four integer cells:

1. The channel id
--
2.7.4
\
 
 \ /
  Last update: 2017-07-06 14:22    [W:0.078 / U:2.856 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site