lkml.org 
[lkml]   [2017]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] wlcore: add missing nvs file name info for wilink8
Hi,

On Wed, Jul 05, 2017 at 01:06:54AM -0700, Tony Lindgren wrote:
> > > Not sure if this really is a regression as we've always had a bogus
> > > wl1271-nvs.bin in linux-firmware.git. Sure would be nice to fix it,
> > > but going back to using a generic wl1271-nvs.bin sure does not seem
> > > like a good long term fix to me :)
> > A lot of legacy here...
> > Wl1271-nvs has been used mainly with wilink6/7 and indeed was device specific
> > Holding calibration info etc.
> > When they started with wilink8 the device specific configuration that was
> > Part of it has switched to wl18xx-conf.bin and using the wlaconf tool for setting it.
> > Also there is no calibration specific info per device with wilink8 so the wl18xx-conf.bin
> > The only thing left in wl1271-nvs.bin for wilink8 was the mac address override.
>
> And the default wl1271-nvs.bin sets the mac address to a bogus deadbeef address,
> so it's wrong to use and totally broken for distros :(

So use something like the following pseudo-code?

if (fw->mac_address == deadbeef) {
fw->mac_address = get_random_mac();
dev_warn(dev, "Detected unconfigured wl1271-nvs.bin.\n"
"Your device will run with limited performance.\n"
"Please use ti-utils to configure your device.\n");
}

-- Sebastian
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-07-05 10:29    [W:0.072 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site