lkml.org 
[lkml]   [2017]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/4] [media] platform: Add Synopsys Designware HDMI RX Controller Driver
From
Date


On 04-07-2017 10:39, Hans Verkuil wrote:
>
>>>>>> +static const struct v4l2_subdev_video_ops
>>>>>> dw_hdmi_sd_video_ops = {
>>>>>> + .s_routing = dw_hdmi_s_routing,
>>>>>> + .g_input_status = dw_hdmi_g_input_status,
>>>>>> + .g_parm = dw_hdmi_g_parm,
>>>>>> + .g_dv_timings = dw_hdmi_g_dv_timings,
>>>>>> + .query_dv_timings = dw_hdmi_query_dv_timings,
>>>>> No s_dv_timings???
>>>> Hmm, yeah, I didn't implement it because the callchain and the
>>>> player I use just use {get/set}_fmt. s_dv_timings can just
>>>> populate the fields and replace them with the detected dv_timings
>>>> ? Just like set_fmt does? Because the controller has no scaler.
>>> No, s_dv_timings is the function that actually sets
>>> dw_dev->timings.
>>> After you check that it is valid of course (call
>>> v4l2_valid_dv_timings).
>>>
>>> set_fmt calls get_fmt which returns the information from
>>> dw_dev->timings.
>>>
>>> But it is s_dv_timings that has to set dw_dev->timings.
>>>
>>> With the current code you can only capture 640x480 (the default
>>> timings).
>>> Have you ever tested this with any other timings? I don't quite
>>> understand
>>> how you test.
>> I use mpv to test with a wrapper driver that just calls the
>> subdev ops and sets up a video dma.
>>
>> Ah, I see now. I failed to port the correct callbacks and in the
>> upstream version I'm using I only tested with 640x480 ...
>>
>> But apart from that this is a capture device without scaling so I
>> can not set timings, I can only return them so that applications
>> know which format I'm receiving, right? So my s_dv_timings will
>> return the same as query_dv_timings ...
> Well, to be precise: s_dv_timings just accepts what the application
> gives it (as long as it is within the dv_timings capabilities). But
> those timings come in practice from a query_dv_timings call from the
> application.
>
> The core rule is that receivers cannot randomly change timings since
> timings are related to buffer sizes. You do not want the application
> to allocate buffers for 640x480 and when the source changes to 1920x1080
> have those buffers suddenly overflow.
>
> Instead the app queries the timings, allocates the buffers, start
> streaming and when the timings change it will get an event so it can
> stop streaming, reallocate buffers, and start the process again.
>
> In other words, the application is in control here.
>

... But this is not true for mpv/mplayer. They first try to set a
default format (by using s_fmt) and then query the format again
(by using g_fmt) ... So dv_timings are never used. Are these apps
broken? Im only using them because of performance, do you
recommend others?

Best regards,
Jose Miguel Abreu

\
 
 \ /
  Last update: 2017-07-04 14:34    [W:0.107 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site