Messages in this thread | | | Subject | Re: [PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board | From | Hoegeun Kwon <> | Date | Tue, 01 Aug 2017 09:26:05 +0900 |
| |
Dear Thierry,
Could you please check these patches.
Best regards, Hoegeun
On 07/13/2017 11:20 AM, Hoegeun Kwon wrote: > Hi Andrzej, > > Thank you for your review. > > The purpose of this patch is add support for s6e63j0x03 AMOLED panel > on the rinato board(Samsung Galaxy Gear 2). > > Changes for V4: > - Added Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> (2/3 patch). > - Fixed the style of macro function. > > Changes for V3: > - Applied patch 'ARM: dts: exynos: Fix the active of reset gpios from rinato dts' (v2 3/4) > - Remove the unnecessary define ('MIN_BRIGHTNESS') > - Removed explicit casting. > - Removed violation of kernel coding style. > > Changes for V2: > - Added the interface info in binding document. > - Added Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> (1/3 patch). > - Added Acked-by: Rob Herring <robh@kernel.org> (1/3 patch). > - Fixed the tristate of config from video mode to command mode. > - Fixed the reset gpios from active high to low from rinato dts. > - Fixed a lot of things in panel driver, reflect Andrzej's review. > > Best regards, > Hoegeun > > Hoegeun Kwon (3): > dt-bindings: Add support for samsung s6e63j0x03 panel binding > drm/panel: Add support for s6e63j0x03 panel driver > ARM: dts: exynos: Remove the display-timing and delay from rinato dts > > .../bindings/display/panel/samsung,s6e63j0x03.txt | 24 + > arch/arm/boot/dts/exynos3250-rinato.dts | 22 - > drivers/gpu/drm/panel/Kconfig | 7 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 532 +++++++++++++++++++++ > 5 files changed, 564 insertions(+), 22 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt > create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c >
| |