lkml.org 
[lkml]   [2017]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RFC 3/4] arch/sparc: Optimized memcpy, memset, copy_to_user, copy_from_user for M7
From
From: Babu Moger <babu.moger@oracle.com>
Date: Thu, 27 Jul 2017 15:57:29 -0600

> @@ -600,7 +600,7 @@ niagara_tlb_fixup:
> be,pt %xcc, niagara4_patch
> nop
> cmp %g1, SUN4V_CHIP_SPARC_M7
> - be,pt %xcc, niagara4_patch
> + be,pt %xcc, sparc_m7_patch
> nop
> cmp %g1, SUN4V_CHIP_SPARC_SN
> be,pt %xcc, niagara4_patch

This part will need to be respun now that the M8 patches are in
as there will be a slight conflict in this hunk.

> + .register %g2,#scratch
> +
> + .section ".text"
> + .global FUNC_NAME
> + .type FUNC_NAME, #function
> + .align 16
> +FUNC_NAME:
> + srlx %o2, 31, %g2
> + cmp %g2, 0
> + tne %xcc, 5
> + PREAMBLE
> + mov %o0, %g1 ! save %o0
> + brz,pn %o2, .Lsmallx
> +
> + cmp %o2, 3
> + ble,pn %icc, .Ltiny_cp
> + cmp %o2, 19
> + ble,pn %icc, .Lsmall_cp
> + or %o0, %o1, %g2
> + cmp %o2, SMALL_MAX
> + bl,pn %icc, .Lmedium_cp
> + nop

What in world is going on with this indentation?

I can't comprehend how, if anyone actually put their eyes on
this code and the patch itself, wouldn't notice this.

DO NOT mix all-spaced and TAB+space indentation.

Always, consistently, use as many TABs as you can and
then when needed add trailing spaces.

> +.Lsrc_dst_aligned_on_8:
> + ! check if we are copying MED_MAX or more bytes
> + set MED_MAX, %o3
> + cmp %o2, %o3 ! limit to store buffer size
> + bgu,pn %ncc, .Llarge_align8_copy
> + nop

Again, same problem here.

> +/*
> + * Handle all cases where src and dest are aligned on word
> + * boundaries. Use unrolled loops for better performance.
> + * This option wins over standard large data move when
> + * source and destination is in cache for.Lmedium
> + * to short data moves.
> + */
> + set MED_WMAX, %o3
> + cmp %o2, %o3 ! limit to store buffer size
> + bge,pt %ncc, .Lunalignrejoin ! otherwise rejoin main loop
> + nop

More weird indentation.

> +.dbalign:
> + andcc %o5, 7, %o3 ! is sp1 aligned on a 8 byte bound?
> + bz,pt %ncc, .blkalign ! already long word aligned
> + sub %o3, 8, %o3 ! -(bytes till long word aligned)
> +
> + add %o2, %o3, %o2 ! update o2 with new count
> + ! Set -(%o3) bytes till sp1 long word aligned
> +1: stb %o1, [%o5] ! there is at least 1 byte to set
> + inccc %o3 ! byte clearing loop
> + bl,pt %ncc, 1b
> + inc %o5

More weird indentation.

> + ! Now sp1 is block aligned
> +.blkwr:
> + andn %o2, 63, %o4 ! calculate size of blocks in bytes
> + brz,pn %o1, .wrzero ! special case if c == 0
> + and %o2, 63, %o3 ! %o3 = bytes left after blk stores.
> +
> + set MIN_LOOP, %g1
> + cmp %o4, %g1 ! check there are enough bytes to set
> + blu,pn %ncc, .short_set ! to justify cost of membar
> + ! must be > pre-cleared lines
> + nop

Likewise.

> +
> + ! initial cache-clearing stores
> + ! get store pipeline moving
> + rd %asi, %g3 ! save %asi to be restored later
> + wr %g0, ASI_STBIMRU_P, %asi

Likewise.

> +.wrzero_small:
> + stxa %o1, [%o5]ASI_STBI_P
> + subcc %o4, 64, %o4
> + bgu,pt %ncc, .wrzero_small
> + add %o5, 64, %o5
> + ba,a .bsi_done

Likewise.

> +.asi_done:
> + wr %g3, 0x0, %asi ! restored saved %asi
> +.bsi_done:
> + membar #StoreStore ! required by use of Block Store Init

Likewise.

> + .size M7memset,.-M7memset

It's usually a lot better to use ENTRY() and ENDPROC() instead of
expanding these kinds of directives out.

> + .globl m7_patch_copyops
> + .type m7_patch_copyops,#function
> +m7_patch_copyops:

ENTRY()

> + .size m7_patch_copyops,.-m7_patch_copyops

ENDPROC()

> + .globl m7_patch_bzero
> + .type m7_patch_bzero,#function
> +m7_patch_bzero:

Likewise.

> + .size m7_patch_bzero,.-m7_patch_bzero

Likewise.

> + .globl m7_patch_pageops
> + .type m7_patch_pageops,#function
> +m7_patch_pageops:

Likewise.

> + .size m7_patch_pageops,.-m7_patch_pageops

Likewise.

\
 
 \ /
  Last update: 2017-07-29 23:36    [W:0.078 / U:1.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site