lkml.org 
[lkml]   [2017]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: nand: sunxi: fix potential divide-by-zero error
Date
clk_round_rate() can return <= 0. Currently the value returned by
clk_round_rate() is used directly for a division. This patch introduces a
guard to ensure a divide-by-zero or a divide by a negative number for that
matter can't happen by bugging out returning -EINVAL if clk_round_rate()
returns <= 0.

Fixes: 2d43457f79e4 ("mtd: nand: sunxi: fix EDO mode selection")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
---
drivers/mtd/nand/sunxi_nand.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index d0b6f8f..6abd142 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1728,6 +1728,10 @@ static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
*/
chip->clk_rate = NSEC_PER_SEC / min_clk_period;
real_clk_rate = clk_round_rate(nfc->mod_clk, chip->clk_rate);
+ if (real_clk_rate <= 0) {
+ dev_err(nfc->dev, "Unable to round clk %lu\n", chip->clk_rate);
+ return -EINVAL;
+ }

/*
* ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
--
2.7.4
\
 
 \ /
  Last update: 2017-07-28 15:17    [W:0.242 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site