lkml.org 
[lkml]   [2017]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 24/26] x86: Enable User-Mode Instruction Prevention
From
Date
On Fri, 2017-06-09 at 18:10 +0200, Borislav Petkov wrote:
> On Fri, May 05, 2017 at 11:17:22AM -0700, Ricardo Neri wrote:
> > User_mode Instruction Prevention (UMIP) is enabled by setting/clearing a
> > bit in %cr4.
> >
> > It makes sense to enable UMIP at some point while booting, before user
> > spaces come up. Like SMAP and SMEP, is not critical to have it enabled
> > very early during boot. This is because UMIP is relevant only when there is
> > a userspace to be protected from. Given the similarities in relevance, it
> > makes sense to enable UMIP along with SMAP and SMEP.
> >
> > UMIP is enabled by default. It can be disabled by adding clearcpuid=514
> > to the kernel parameters.
> >
> > Cc: Andy Lutomirski <luto@kernel.org>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: H. Peter Anvin <hpa@zytor.com>
> > Cc: Borislav Petkov <bp@suse.de>
> > Cc: Brian Gerst <brgerst@gmail.com>
> > Cc: Chen Yucong <slaoub@gmail.com>
> > Cc: Chris Metcalf <cmetcalf@mellanox.com>
> > Cc: Dave Hansen <dave.hansen@linux.intel.com>
> > Cc: Fenghua Yu <fenghua.yu@intel.com>
> > Cc: Huang Rui <ray.huang@amd.com>
> > Cc: Jiri Slaby <jslaby@suse.cz>
> > Cc: Jonathan Corbet <corbet@lwn.net>
> > Cc: Michael S. Tsirkin <mst@redhat.com>
> > Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
> > Cc: Shuah Khan <shuah@kernel.org>
> > Cc: Vlastimil Babka <vbabka@suse.cz>
> > Cc: Tony Luck <tony.luck@intel.com>
> > Cc: Paolo Bonzini <pbonzini@redhat.com>
> > Cc: Liang Z. Li <liang.z.li@intel.com>
> > Cc: Alexandre Julliard <julliard@winehq.org>
> > Cc: Stas Sergeev <stsp@list.ru>
> > Cc: x86@kernel.org
> > Cc: linux-msdos@vger.kernel.org
> > Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
> > ---
> > arch/x86/Kconfig | 10 ++++++++++
> > arch/x86/kernel/cpu/common.c | 16 +++++++++++++++-
> > 2 files changed, 25 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > index 702002b..1b1bbeb 100644
> > --- a/arch/x86/Kconfig
> > +++ b/arch/x86/Kconfig
> > @@ -1745,6 +1745,16 @@ config X86_SMAP
> >
> > If unsure, say Y.
> >
> > +config X86_INTEL_UMIP
> > + def_bool y
>
> That's a bit too much. It makes sense on distro kernels but how many
> machines out there actually have UMIP?

So would this become a y when more machines have UMIP?
>
> > + depends on CPU_SUP_INTEL
> > + prompt "Intel User Mode Instruction Prevention" if EXPERT
> > + ---help---
> > + The User Mode Instruction Prevention (UMIP) is a security
> > + feature in newer Intel processors. If enabled, a general
> > + protection fault is issued if the instructions SGDT, SLDT,
> > + SIDT, SMSW and STR are executed in user mode.
> > +
> > config X86_INTEL_MPX
> > prompt "Intel MPX (Memory Protection Extensions)"
> > def_bool n
> > diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
> > index 8ee3211..66ebded 100644
> > --- a/arch/x86/kernel/cpu/common.c
> > +++ b/arch/x86/kernel/cpu/common.c
> > @@ -311,6 +311,19 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c)
> > }
> > }
> >
> > +static __always_inline void setup_umip(struct cpuinfo_x86 *c)
> > +{
> > + if (cpu_feature_enabled(X86_FEATURE_UMIP) &&
> > + cpu_has(c, X86_FEATURE_UMIP))
>
> Hmm, so if UMIP is not build-time disabled, the cpu_feature_enabled()
> will call static_cpu_has().
>
> Looks like you want to call cpu_has() too because alternatives haven't
> run yet and static_cpu_has() will reply wrong. Please state that in a
> comment.

Why would static_cpu_has() reply wrong if alternatives are not in place?
Because it uses the boot CPU data? When it calls _static_cpu_has() it
would do something equivalent to

testb test_bit, boot_cpu_data.x86_capability[bit].

I am calling cpu_has because cpu_feature_enabled(), via
static_cpu_has(), will use the boot CPU data while cpu_has would use the
local CPU data. Is this what you meant?

I can definitely add a comment with this explanation, if it makes sense.

Thanks and BR,
Ricardo

\
 
 \ /
  Last update: 2017-07-26 02:44    [W:0.712 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site