lkml.org 
[lkml]   [2017]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] serial: 8250: fix error handling in of_platform_serial_probe()
Date
clk_disable_unprepare(info->clk) is missed in of_platform_serial_probe(),
while irq_dispose_mapping(port->irq) is missed in of_platform_serial_setup().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
---
v2: Rebase on top of e2860e1f62f2 "serial: 8250_of: Add reset support"
v3: Rename error labels after what they do as Johan Hovold suggested.

drivers/tty/serial/8250/8250_of.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 0cf95fd..6c5a8ca 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -88,7 +88,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
dev_warn(&ofdev->dev, "invalid address\n");
- goto out;
+ goto err_unprepare;
}

spin_lock_init(&port->lock);
@@ -130,16 +130,16 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
prop);
ret = -EINVAL;
- goto out;
+ goto err_dispose;
}
}

info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst))
- goto out;
+ goto err_dispose;
ret = reset_control_deassert(info->rst);
if (ret)
- goto out;
+ goto err_dispose;

port->type = type;
port->uartclk = clk;
@@ -167,7 +167,9 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->handle_irq = fsl8250_handle_irq;

return 0;
-out:
+err_dispose:
+ irq_dispose_mapping(port->irq);
+err_unprepare:
if (info->clk)
clk_disable_unprepare(info->clk);
return ret;
@@ -201,7 +203,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
memset(&port8250, 0, sizeof(port8250));
ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info);
if (ret)
- goto out;
+ goto err_free;

if (port8250.port.fifosize)
port8250.capabilities = UART_CAP_FIFO;
@@ -217,15 +219,18 @@ static int of_platform_serial_probe(struct platform_device *ofdev)

ret = serial8250_register_8250_port(&port8250);
if (ret < 0)
- goto out;
+ goto err_dispose;

info->type = port_type;
info->line = ret;
platform_set_drvdata(ofdev, info);
return 0;
-out:
- kfree(info);
+err_dispose:
irq_dispose_mapping(port8250.port.irq);
+ if (info->clk)
+ clk_disable_unprepare(info->clk);
+err_free:
+ kfree(info);
return ret;
}

--
2.7.4
\
 
 \ /
  Last update: 2017-07-19 10:33    [W:0.062 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site