Messages in this thread | | | Subject | Re: [PATCH 5/5] vfio: platform: reset: Add Broadcom FlexRM reset module | From | Scott Branden <> | Date | Wed, 19 Jul 2017 09:50:16 -0700 |
| |
Hi Anup,
NAK - as indicated in internal review please use unmodified Broadcom legal header in its own comment block.
On 17-07-19 02:33 AM, Anup Patel wrote: > This patch adds low-level reset for Broadcom FlexRM to > VFIO platform. > > It will do the following: > 1. Disable/Deactivate each FlexRM ring > 2. Flush each FlexRM ring > > The cleanup sequence for FlexRM rings is adapted from > Broadcom FlexRM mailbox driver. > > Signed-off-by: Anup Patel <anup.patel@broadcom.com> > Reviewed-by: Oza Oza <oza.oza@broadcom.com> > Reviewed-by: Scott Branden <scott.branden@broadcom.com> > --- > drivers/vfio/platform/reset/Kconfig | 9 +++ > drivers/vfio/platform/reset/Makefile | 1 + > .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 91 ++++++++++++++++++++++ > 3 files changed, 101 insertions(+) > create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > > diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig > index 70cccc5..8d8d226 100644 > --- a/drivers/vfio/platform/reset/Kconfig > +++ b/drivers/vfio/platform/reset/Kconfig > @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET > Enables the VFIO platform driver to handle reset for AMD XGBE > > If you don't know what to do here, say N. > + > +config VFIO_PLATFORM_BCMFLEXRM_RESET > + tristate "VFIO support for Broadcom FlexRM reset" > + depends on VFIO_PLATFORM > + depends on ARCH_BCM_IPROC || COMPILE_TEST > + help > + Enables the VFIO platform driver to handle reset for Broadcom FlexRM > + > + If you don't know what to do here, say N. > diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile > index 93f4e23..8d9874b 100644 > --- a/drivers/vfio/platform/reset/Makefile > +++ b/drivers/vfio/platform/reset/Makefile > @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform > > obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o > obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o > +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o > diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > new file mode 100644 > index 0000000..a890472 > --- /dev/null > +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > @@ -0,0 +1,91 @@ > +/* > + * Copyright (C) 2017 Broadcom > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + * */ Place additional comments in different comment block. /* > + * This driver provides reset support for Broadcom FlexRM ring manager > + * to VFIO platform. > + */ > + > +#include <linux/delay.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > + > +#include "vfio_platform_private.h" > + > +/* FlexRM configuration */ > +#define RING_REGS_SIZE 0x10000 > +#define RING_VER_MAGIC 0x76303031 > + > +/* Per-Ring register offsets */ > +#define RING_VER 0x000 > +#define RING_CONTROL 0x034 > +#define RING_FLUSH_DONE 0x038 > + > +/* Register RING_CONTROL fields */ > +#define CONTROL_FLUSH_SHIFT 5 > +#define CONTROL_ACTIVE_SHIFT 4 > + > +/* Register RING_FLUSH_DONE fields */ > +#define FLUSH_DONE_MASK 0x1 > + > +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring) > +{ > + unsigned int timeout; > + > + /* Disable/inactivate ring */ > + writel_relaxed(0x0, ring + RING_CONTROL); > + > + /* Flush ring with timeout of 1s */ > + timeout = 1000; > + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL); > + do { > + if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK) > + break; > + mdelay(1); > + } while (timeout--); > + > + if (!timeout) > + pr_warn("VFIO FlexRM shutdown timedout\n"); > +} > + > +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev) > +{ > + void __iomem *ring; > + struct vfio_platform_region *reg = &vdev->regions[0]; > + > + /* Map FlexRM ring registers if not mapped */ > + if (!reg->ioaddr) { > + reg->ioaddr = ioremap_nocache(reg->addr, reg->size); > + if (!reg->ioaddr) > + return -ENOMEM; > + } > + > + /* Discover and shutdown each FlexRM ring */ > + for (ring = reg->ioaddr; > + ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) { > + if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC) > + vfio_platform_bcmflexrm_shutdown(ring); > + } > + > + return 0; > +} > + > +module_vfio_reset_handler("brcm,iproc-flexrm-mbox", > + vfio_platform_bcmflexrm_reset); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>"); > +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
Thanks, Scott
| |