lkml.org 
[lkml]   [2017]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] powernv/powerpc: Clear PECE1 in LPCR via stop-api only on Hotplug
Date
From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>


Currently we use the stop-api provided by the firmware to program the
SLW engine to restore the values of hypervisor resources that get lost
on deeper idle states (such as winkle). Since the deep states were
only used for CPU-Hotplug on POWER8 systems, we would program the LPCR
to have the PECE1 bit since Hotplugged CPUs shouldn't be spuriously
woken up by decrementer.

On POWER9, some of the deep platform idle states such as stop4 can be
used in cpuidle as well. In this case, we want the CPU in stop4 to be
woken up by the decrementer when some timer on the CPU expires.

In this patch, for POWER9, we program the stop-api for LPCR with PECE1
bit cleared only when we are offlining the CPU.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/idle.c | 12 +++++++++++-
arch/powerpc/platforms/powernv/smp.c | 28 ++++++++++++++++++++++++----
2 files changed, 35 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 2abee07..f4a29d4 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -68,7 +68,7 @@ static int pnv_save_sprs_for_deep_states(void)
* all cpus at boot. Get these reg values of current cpu and use the
* same across all cpus.
*/
- uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
+ uint64_t lpcr_val = mfspr(SPRN_LPCR);
uint64_t hid0_val = mfspr(SPRN_HID0);
uint64_t hid1_val = mfspr(SPRN_HID1);
uint64_t hid4_val = mfspr(SPRN_HID4);
@@ -85,6 +85,16 @@ static int pnv_save_sprs_for_deep_states(void)
if (rc != 0)
return rc;

+ /*
+ * On POWER8, the only state that uses SLW engine is
+ * winkle. This is only used for CPU-Hotplug. So we
+ * clear the decrementer bit from LPCR since we
+ * don't want to be woken up on decrementer when in
+ * winkle.
+ */
+ if (!cpu_has_feature(CPU_FTR_ARCH_300))
+ lpcr_val = lpcr_val & ~(u64)LPCR_PECE1;
+
rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
if (rc != 0)
return rc;
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 40dae96..5f2a712 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -143,7 +143,8 @@ static void pnv_smp_cpu_kill_self(void)
{
unsigned int cpu;
unsigned long srr1, wmask;
-
+ uint64_t lpcr_val;
+ uint64_t pir;
/* Standard hot unplug procedure */
/*
* This hard disables local interurpts, ensuring we have no lazy
@@ -164,13 +165,17 @@ static void pnv_smp_cpu_kill_self(void)
if (cpu_has_feature(CPU_FTR_ARCH_207S))
wmask = SRR1_WAKEMASK_P8;

+ pir = get_hard_smp_processor_id(cpu);
/* We don't want to take decrementer interrupts while we are offline,
* so clear LPCR:PECE1. We keep PECE2 (and LPCR_PECE_HVEE on P9)
* enabled as to let IPIs in.
*/
- mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
+ lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
+ mtspr(SPRN_LPCR, lpcr_val);

while (!generic_check_cpu_restart(cpu)) {
+
+
/*
* Clear IPI flag, since we don't handle IPIs while
* offline, except for those when changing micro-threading
@@ -180,8 +185,15 @@ static void pnv_smp_cpu_kill_self(void)
*/
kvmppc_set_host_ipi(cpu, 0);

+ /*
+ * If the CPU gets woken up by a special wakeup,
+ * ensure that the SLW engine sets LPCR with
+ * decrementer bit cleared, else we will get spurious
+ * wakeups.
+ */
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
srr1 = pnv_cpu_offline(cpu);
-
WARN_ON(lazy_irq_pending());

/*
@@ -220,7 +232,15 @@ static void pnv_smp_cpu_kill_self(void)
}

/* Re-enable decrementer interrupts */
- mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
+ lpcr_val = mfspr(SPRN_LPCR) | LPCR_PECE1;
+ mtspr(SPRN_LPCR, lpcr_val);
+
+ /*
+ * We want stop states to be woken up by decrementer for
+ * non-hotplug cases.
+ */
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
DBG("CPU%d coming online...\n", cpu);
}

--
1.9.4
\
 
 \ /
  Last update: 2017-07-18 16:30    [W:0.122 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site