lkml.org 
[lkml]   [2017]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/14] qcom: mtd: nand: add and initialize QPIC DMA resources
On 2017-06-29 15:18, Marek Vasut wrote:
> On 06/29/2017 09:15 AM, Abhishek Sahu wrote:
>> 1. The QPIC NAND uses 3 BAM channels: command, data tx and
>> data rx while EBI2 NAND uses only single ADM channel.
>>
>> 2. The EBI2 NAND uses normal register read buffer since this
>> buffer will be remapped with dma_map_sg. The QPIC NAND will give
>> register read buffer in command descriptor and the command
>> descriptor will be mapped with dma_map_sg so the register buffer
>> should be DMA coherent.
>>
>> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
>
> The patch does two things, so make two patches. Also split the DT
> changes into separate patch ...

Sure. I will do the same in v2.

>
>> ---
>> .../devicetree/bindings/mtd/qcom_nandc.txt | 25 +++--
>> drivers/mtd/nand/qcom_nandc.c | 106
>> ++++++++++++++++-----
>> 2 files changed, 99 insertions(+), 32 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
>> b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
>> index 5d0f7ae..87b9a56 100644
>> --- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
>> +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
>> @@ -9,15 +9,17 @@ Required properties:
>> - clock-names: must contain "core" for the core clock and "aon" for
>> the
>> always on clock
>> - dmas: DMA specifier, consisting of a phandle to the ADM DMA
>> - controller node and the channel number to be used for
>> - NAND. Refer to dma.txt and qcom_adm.txt for more details
>> -- dma-names: must be "rxtx"
>> -- qcom,cmd-crci: must contain the ADM command type CRCI block
>> instance
>> - number specified for the NAND controller on the given
>> - platform
>> -- qcom,data-crci: must contain the ADM data type CRCI block instance
>> - number specified for the NAND controller on the given
>> - platform
>> + or BAM DMA controller node and the channel number to
>> + be used for NAND. Refer to dma.txt, qcom_adm.txt(ADM)
>> + and qcom/bam_dma.txt(BAM) for more details
>> +- dma-names: "rxtx" - ADM
>> + "tx", "rx", "cmd" - BAM
>> +- qcom,cmd-crci: Only required for ADM DMA. must contain the ADM
>> command
>> + type CRCI block instance number specified for the NAND
>> + controller on the given platform.
>> +- qcom,data-crci: Only required for ADM DMA. must contain the ADM
>> data
>> + type CRCI block instance number specified for the NAND
>> + controller on the given platform.
>> - #address-cells: <1> - subnodes give the chip-select number
>> - #size-cells: <0>
>>
>> @@ -95,6 +97,11 @@ nand@79b0000 {
>> <&gcc GCC_QPIC_AHB_CLK>;
>> clock-names = "core", "aon";
>>
>> + dmas = <&qpicbam 0>,
>> + <&qpicbam 1>,
>> + <&qpicbam 2>;
>> + dma-names = "tx", "rx", "cmd";
>> +
>> #address-cells = <1>;
>> #size-cells = <0>;
>>
>> diff --git a/drivers/mtd/nand/qcom_nandc.c
>> b/drivers/mtd/nand/qcom_nandc.c
>> index f55f728..520add9 100644
>> --- a/drivers/mtd/nand/qcom_nandc.c
>> +++ b/drivers/mtd/nand/qcom_nandc.c
>> @@ -226,6 +226,7 @@ struct nandc_regs {
>> * by upper layers directly
>> * @buf_size/count/start: markers for chip->read_buf/write_buf
>> functions
>> * @reg_read_buf: local buffer for reading back registers via DMA
>> + * @reg_read_buf_phys: contains dma address for register read buffer
>> * @reg_read_pos: marker for data read in reg_read_buf
>> *
>> * @regs: a contiguous chunk of memory for DMA register
>> @@ -249,9 +250,19 @@ struct qcom_nand_controller {
>> struct clk *core_clk;
>> struct clk *aon_clk;
>>
>> - struct dma_chan *chan;
>> - unsigned int cmd_crci;
>> - unsigned int data_crci;
>> + union {
>> + struct {
>> + struct dma_chan *tx_chan;
>> + struct dma_chan *rx_chan;
>> + struct dma_chan *cmd_chan;
>> + };
>> + struct {
>> + struct dma_chan *chan;
>> + unsigned int cmd_crci;
>> + unsigned int data_crci;
>> + };
>> + };
>> +
>> struct list_head desc_list;
>>
>> u8 *data_buffer;
>> @@ -261,6 +272,7 @@ struct qcom_nand_controller {
>> int buf_start;
>>
>> __le32 *reg_read_buf;
>> + dma_addr_t reg_read_buf_phys;
>> int reg_read_pos;
>>
>> struct nandc_regs *regs;
>> @@ -1956,16 +1968,48 @@ static int qcom_nandc_alloc(struct
>> qcom_nand_controller *nandc)
>> if (!nandc->regs)
>> return -ENOMEM;
>>
>> - nandc->reg_read_buf = devm_kzalloc(nandc->dev,
>> - MAX_REG_RD * sizeof(*nandc->reg_read_buf),
>> - GFP_KERNEL);
>> - if (!nandc->reg_read_buf)
>> - return -ENOMEM;
>>
>> - nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
>> - if (!nandc->chan) {
>> - dev_err(nandc->dev, "failed to request slave channel\n");
>> - return -ENODEV;
>> + if (!nandc->dma_bam_enabled) {
>> + nandc->reg_read_buf =
>> + devm_kzalloc(nandc->dev, MAX_REG_RD *
>> + sizeof(*nandc->reg_read_buf), GFP_KERNEL);
>> +
>> + if (!nandc->reg_read_buf)
>> + return -ENOMEM;
>> +
>> + nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
>> + if (!nandc->chan) {
>> + dev_err(nandc->dev,
>> + "failed to request slave channel\n");
>> + return -ENODEV;
>> + }
>> + } else {
>> + nandc->reg_read_buf =
>> + dmam_alloc_coherent(nandc->dev, MAX_REG_RD *
>> + sizeof(*nandc->reg_read_buf),
>> + &nandc->reg_read_buf_phys,
>> + GFP_KERNEL);
>> +
>> + if (!nandc->reg_read_buf)
>> + return -ENOMEM;
>> +
>> + nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx");
>> + if (!nandc->tx_chan) {
>> + dev_err(nandc->dev, "failed to request tx channel\n");
>> + return -ENODEV;
>> + }
>> +
>> + nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx");
>> + if (!nandc->rx_chan) {
>> + dev_err(nandc->dev, "failed to request rx channel\n");
>> + return -ENODEV;
>> + }
>> +
>> + nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd");
>> + if (!nandc->cmd_chan) {
>> + dev_err(nandc->dev, "failed to request cmd channel\n");
>> + return -ENODEV;
>> + }
>> }
>>
>> INIT_LIST_HEAD(&nandc->desc_list);
>> @@ -1978,7 +2022,19 @@ static int qcom_nandc_alloc(struct
>> qcom_nand_controller *nandc)
>>
>> static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
>> {
>> - dma_release_channel(nandc->chan);
>> + if (nandc->dma_bam_enabled) {
>> + if (nandc->tx_chan)
>> + dma_release_channel(nandc->tx_chan);
>> +
>> + if (nandc->rx_chan)
>> + dma_release_channel(nandc->rx_chan);
>> +
>> + if (nandc->cmd_chan)
>> + dma_release_channel(nandc->cmd_chan);
>> + } else {
>> + if (nandc->chan)
>> + dma_release_channel(nandc->chan);
>> + }
>> }
>>
>> /* one time setup of a few nand controller registers */
>> @@ -2063,16 +2119,20 @@ static int qcom_nandc_parse_dt(struct
>> platform_device *pdev)
>> struct device_node *np = nandc->dev->of_node;
>> int ret;
>>
>> - ret = of_property_read_u32(np, "qcom,cmd-crci", &nandc->cmd_crci);
>> - if (ret) {
>> - dev_err(nandc->dev, "command CRCI unspecified\n");
>> - return ret;
>> - }
>> + if (!nandc->dma_bam_enabled) {
>> + ret = of_property_read_u32(np, "qcom,cmd-crci",
>> + &nandc->cmd_crci);
>> + if (ret) {
>> + dev_err(nandc->dev, "command CRCI unspecified\n");
>> + return ret;
>> + }
>>
>> - ret = of_property_read_u32(np, "qcom,data-crci", &nandc->data_crci);
>> - if (ret) {
>> - dev_err(nandc->dev, "data CRCI unspecified\n");
>> - return ret;
>> + ret = of_property_read_u32(np, "qcom,data-crci",
>> + &nandc->data_crci);
>> + if (ret) {
>> + dev_err(nandc->dev, "data CRCI unspecified\n");
>> + return ret;
>> + }
>> }
>>
>> return 0;
>> @@ -2128,7 +2188,7 @@ static int qcom_nandc_probe(struct
>> platform_device
>> *pdev)
>>
>> ret = qcom_nandc_alloc(nandc);
>> if (ret)
>> - return ret;
>> + goto err_core_clk;
>>
>> ret = clk_prepare_enable(nandc->core_clk);
>> if (ret)
>>
>
> Can you please fix your mailer to stop adding "QUALCOMM INDIA, on
> behalf
> of Qualcomm Innovation Center"... stuff at the bottom of the patches ?

Sorry Marek. We can't remove this line since it is our legal
team requirement and we need to follow this while submitting
the patches.

All the Qualcomm patches need be sent from codeaurora
and this line implies that these patches are submitted from Qualcomm.
this line will come only for the patches. For replying
, this line will not come.

--
Abhishek Sahu

\
 
 \ /
  Last update: 2017-07-17 08:37    [W:0.140 / U:1.128 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site