lkml.org 
[lkml]   [2017]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] PCI: qcom: Allow post_init to fail
Date
host_init should detect and propagate errors from post_init.

In addition, by acknowleding that post_init can fail we must disable the
post_init resources in a step separate from the deinit, so that we don't
try to disable the post_init resources a second time.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pci/dwc/pcie-qcom.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 7b703741a3fd..26e84a957c35 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -124,6 +124,7 @@ struct qcom_pcie_ops {
int (*init)(struct qcom_pcie *pcie);
int (*post_init)(struct qcom_pcie *pcie);
void (*deinit)(struct qcom_pcie *pcie);
+ void (*post_deinit)(struct qcom_pcie *pcie);
void (*ltssm_enable)(struct qcom_pcie *pcie);
};

@@ -517,13 +518,19 @@ static void qcom_pcie_deinit_v2(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_v2 *res = &pcie->res.v2;

- clk_disable_unprepare(res->pipe_clk);
clk_disable_unprepare(res->slave_clk);
clk_disable_unprepare(res->master_clk);
clk_disable_unprepare(res->cfg_clk);
clk_disable_unprepare(res->aux_clk);
}

+static void qcom_pcie_post_deinit_v2(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+
+ clk_disable_unprepare(res->pipe_clk);
+}
+
static int qcom_pcie_init_v2(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
@@ -907,8 +914,11 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
if (ret)
goto err_deinit;

- if (pcie->ops->post_init)
- pcie->ops->post_init(pcie);
+ if (pcie->ops->post_init) {
+ ret = pcie->ops->post_init(pcie);
+ if (ret)
+ goto err_disable_phy;
+ }

dw_pcie_setup_rc(pp);

@@ -924,6 +934,9 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
return 0;
err:
qcom_ep_reset_assert(pcie);
+ if (pcie->ops->post_deinit)
+ pcie->ops->post_deinit(pcie);
+err_disable_phy:
phy_power_off(pcie->phy);
err_deinit:
pcie->ops->deinit(pcie);
@@ -971,6 +984,7 @@ static const struct qcom_pcie_ops ops_v2 = {
.init = qcom_pcie_init_v2,
.post_init = qcom_pcie_post_init_v2,
.deinit = qcom_pcie_deinit_v2,
+ .post_deinit = qcom_pcie_post_deinit_v2,
.ltssm_enable = qcom_pcie_v2_ltssm_enable,
};

--
2.12.0
\
 
 \ /
  Last update: 2017-07-16 08:42    [W:0.339 / U:43.476 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site