lkml.org 
[lkml]   [2017]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/8] ktest: Use config-bisect.pl in ktest.pl
Date
Reduce code duplication and take advantage of bisection logic
improvements by calling config-bisect.pl.

The output of make oldconfig is now copied directly to the desired file,
rather than doing assign_configs+save_config, in order to preserve the
ordering so that diffing the configs at the end will provide useful
output.

Signed-off-by: Scott Wood <swood@redhat.com>
---
tools/testing/ktest/ktest.pl | 247 +++++--------------------------------------
1 file changed, 29 insertions(+), 218 deletions(-)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 7d537bdf462b..cd1f4b5b76b7 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -3086,76 +3086,6 @@ sub create_config {
make_oldconfig;
}

-# compare two config hashes, and return configs with different vals.
-# It returns B's config values, but you can use A to see what A was.
-sub diff_config_vals {
- my ($pa, $pb) = @_;
-
- # crappy Perl way to pass in hashes.
- my %a = %{$pa};
- my %b = %{$pb};
-
- my %ret;
-
- foreach my $item (keys %a) {
- if (defined($b{$item}) && $b{$item} ne $a{$item}) {
- $ret{$item} = $b{$item};
- }
- }
-
- return %ret;
-}
-
-# compare two config hashes and return the configs in B but not A
-sub diff_configs {
- my ($pa, $pb) = @_;
-
- my %ret;
-
- # crappy Perl way to pass in hashes.
- my %a = %{$pa};
- my %b = %{$pb};
-
- foreach my $item (keys %b) {
- if (!defined($a{$item})) {
- $ret{$item} = $b{$item};
- }
- }
-
- return %ret;
-}
-
-# return if two configs are equal or not
-# 0 is equal +1 b has something a does not
-# +1 if a and b have a different item.
-# -1 if a has something b does not
-sub compare_configs {
- my ($pa, $pb) = @_;
-
- my %ret;
-
- # crappy Perl way to pass in hashes.
- my %a = %{$pa};
- my %b = %{$pb};
-
- foreach my $item (keys %b) {
- if (!defined($a{$item})) {
- return 1;
- }
- if ($a{$item} ne $b{$item}) {
- return 1;
- }
- }
-
- foreach my $item (keys %a) {
- if (!defined($b{$item})) {
- return -1;
- }
- }
-
- return 0;
-}
-
sub run_config_bisect_test {
my ($type) = @_;

@@ -3168,166 +3098,51 @@ sub run_config_bisect_test {
return $ret;
}

-sub process_failed {
- my ($config) = @_;
+sub config_bisect_end {
+ my ($good, $bad) = @_;

doprint "\n\n***************************************\n";
- doprint "Found bad config: $config\n";
+ doprint "No more config bisecting possible.\n";
+ doprint `diff -u $good $bad`;
doprint "***************************************\n\n";
}

-# used for config bisecting
-my $good_config;
-my $bad_config;
-
-sub process_new_config {
- my ($tc, $nc, $gc, $bc) = @_;
-
- my %tmp_config = %{$tc};
- my %good_configs = %{$gc};
- my %bad_configs = %{$bc};
-
- my %new_configs;
-
- my $runtest = 1;
- my $ret;
-
- create_config "tmp_configs", \%tmp_config;
- assign_configs \%new_configs, $output_config;
-
- $ret = compare_configs \%new_configs, \%bad_configs;
- if (!$ret) {
- doprint "New config equals bad config, try next test\n";
- $runtest = 0;
- }
-
- if ($runtest) {
- $ret = compare_configs \%new_configs, \%good_configs;
- if (!$ret) {
- doprint "New config equals good config, try next test\n";
- $runtest = 0;
- }
- }
-
- %{$nc} = %new_configs;
-
- return $runtest;
-}
-
sub run_config_bisect {
- my ($pgood, $pbad) = @_;
-
- my $type = $config_bisect_type;
-
- my %good_configs = %{$pgood};
- my %bad_configs = %{$pbad};
-
- my %diff_configs = diff_config_vals \%good_configs, \%bad_configs;
- my %b_configs = diff_configs \%good_configs, \%bad_configs;
- my %g_configs = diff_configs \%bad_configs, \%good_configs;
-
- my @diff_arr = keys %diff_configs;
- my $len_diff = $#diff_arr + 1;
-
- my @b_arr = keys %b_configs;
- my $len_b = $#b_arr + 1;
-
- my @g_arr = keys %g_configs;
- my $len_g = $#g_arr + 1;
-
- my $runtest = 1;
- my %new_configs;
+ my ($good, $bad) = @_;
+ my $cmd;
my $ret;

- # First, lets get it down to a single subset.
- # Is the problem with a difference in values?
- # Is the problem with a missing config?
- # Is the problem with a config that breaks things?
-
- # Enable all of one set and see if we get a new bad
- # or good config.
+ run_command "$builddir/tools/testing/ktest/config-bisect.pl $outputdir $good $bad";

- # first set the good config to the bad values.
-
- doprint "d=$len_diff g=$len_g b=$len_b\n";
-
- # first lets enable things in bad config that are enabled in good config
-
- if ($len_diff > 0) {
- if ($len_b > 0 || $len_g > 0) {
- my %tmp_config = %bad_configs;
-
- doprint "Set tmp config to be bad config with good config values\n";
- foreach my $item (@diff_arr) {
- $tmp_config{$item} = $good_configs{$item};
- }
-
- $runtest = process_new_config \%tmp_config, \%new_configs,
- \%good_configs, \%bad_configs;
- }
+ if ($run_command_status == 2) {
+ config_bisect_end $good, $bad;
+ return 1;
}

- if (!$runtest && $len_diff > 0) {
-
- if ($len_diff == 1) {
- process_failed $diff_arr[0];
- return 1;
- }
- my %tmp_config = %bad_configs;
-
- my $half = int($#diff_arr / 2);
- my @tophalf = @diff_arr[0 .. $half];
-
- doprint "Settings bisect with top half:\n";
- doprint "Set tmp config to be bad config with some good config values\n";
- foreach my $item (@tophalf) {
- $tmp_config{$item} = $good_configs{$item};
- }
-
- $runtest = process_new_config \%tmp_config, \%new_configs,
- \%good_configs, \%bad_configs;
-
- if (!$runtest) {
- my %tmp_config = %bad_configs;
-
- doprint "Try bottom half\n";
-
- my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr];
-
- foreach my $item (@bottomhalf) {
- $tmp_config{$item} = $good_configs{$item};
- }
-
- $runtest = process_new_config \%tmp_config, \%new_configs,
- \%good_configs, \%bad_configs;
- }
+ if ($run_command_status != 0) {
+ dodie "config-bisect.pl failed";
}

- if ($runtest) {
- $ret = run_config_bisect_test $type;
- if ($ret) {
- doprint "NEW GOOD CONFIG\n";
- %good_configs = %new_configs;
- run_command "mv $good_config ${good_config}.last";
- save_config \%good_configs, $good_config;
- %{$pgood} = %good_configs;
- } else {
- doprint "NEW BAD CONFIG\n";
- %bad_configs = %new_configs;
- run_command "mv $bad_config ${bad_config}.last";
- save_config \%bad_configs, $bad_config;
- %{$pbad} = %bad_configs;
- }
- return 0;
+ $ret = run_config_bisect_test $config_bisect_type;
+ if ($ret) {
+ doprint "NEW GOOD CONFIG\n";
+ $cmd = "mv $good ${good}.last && mv $output_config $good";
+ } else {
+ doprint "NEW BAD CONFIG\n";
+ $cmd = "mv $bad ${bad}.last && mv $output_config $bad";
}

- fail "Hmm, need to do a mix match?\n";
- return -1;
+ system($cmd) == 0 or dodie $cmd;
+
+ return 0;
}

sub config_bisect {
my ($i) = @_;

+ my $good_config;
+ my $bad_config;
+
my $type = $config_bisect_type;
my $ret;

@@ -3358,18 +3173,14 @@ sub config_bisect {
doprint "Run good configs through make oldconfig\n";
assign_configs \%tmp_configs, $good_config;
create_config "$good_config", \%tmp_configs;
- assign_configs \%good_configs, $output_config;
+ $good_config = "$tmpdir/good_config";
+ system("cp $output_config $good_config") == 0 or dodie "cp good config";

doprint "Run bad configs through make oldconfig\n";
assign_configs \%tmp_configs, $bad_config;
create_config "$bad_config", \%tmp_configs;
- assign_configs \%bad_configs, $output_config;
-
- $good_config = "$tmpdir/good_config";
$bad_config = "$tmpdir/bad_config";
-
- save_config \%good_configs, $good_config;
- save_config \%bad_configs, $bad_config;
+ system("cp $output_config $bad_config") == 0 or dodie "cp bad config";

if (defined($config_bisect_check) && $config_bisect_check ne "0") {
if ($config_bisect_check ne "good") {
@@ -3393,7 +3204,7 @@ sub config_bisect {
}

do {
- $ret = run_config_bisect \%good_configs, \%bad_configs;
+ $ret = run_config_bisect $good_config, $bad_config;
print_times;
} while (!$ret);

--
2.9.4
\
 
 \ /
  Last update: 2017-07-17 02:17    [W:0.093 / U:1.200 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site