lkml.org 
[lkml]   [2017]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board
Date
Hi Andrzej,

Thank you for your review.

The purpose of this patch is add support for s6e63j0x03 AMOLED panel
on the rinato board(Samsung Galaxy Gear 2).

Changes for V4:
- Added Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> (2/3 patch).
- Fixed the style of macro function.

Changes for V3:
- Applied patch 'ARM: dts: exynos: Fix the active of reset gpios from rinato dts' (v2 3/4)
- Remove the unnecessary define ('MIN_BRIGHTNESS')
- Removed explicit casting.
- Removed violation of kernel coding style.

Changes for V2:
- Added the interface info in binding document.
- Added Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> (1/3 patch).
- Added Acked-by: Rob Herring <robh@kernel.org> (1/3 patch).
- Fixed the tristate of config from video mode to command mode.
- Fixed the reset gpios from active high to low from rinato dts.
- Fixed a lot of things in panel driver, reflect Andrzej's review.

Best regards,
Hoegeun

Hoegeun Kwon (3):
dt-bindings: Add support for samsung s6e63j0x03 panel binding
drm/panel: Add support for s6e63j0x03 panel driver
ARM: dts: exynos: Remove the display-timing and delay from rinato dts

.../bindings/display/panel/samsung,s6e63j0x03.txt | 24 +
arch/arm/boot/dts/exynos3250-rinato.dts | 22 -
drivers/gpu/drm/panel/Kconfig | 7 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 532 +++++++++++++++++++++
5 files changed, 564 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c

--
1.9.1

\
 
 \ /
  Last update: 2017-07-13 04:21    [W:0.107 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site