lkml.org 
[lkml]   [2017]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] ARM: dts: imx7d-sdb: Set VLDO4 outpt to 2.8V for MIPI CSI/DSI
On Sat, Jul 1, 2017 at 4:39 AM, mindentropy <mindentropy@gmail.com> wrote:
> From: Gautam Bhat <mindentropy@gmail.com>
>
> * According to mx7sabresd schematics the MIPI CSI/DSI voltage rails
> should be 2.8V but the voltage provided is a maximum of 3.3V and
> minimum of 1.8V. Providing such a higher voltage might damage the
> peripherals and violates the schematic settings.
>
> Signed-off-by: Gautam Bhat <mindentropy@gmail.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

\
 
 \ /
  Last update: 2017-07-01 14:42    [W:0.043 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site