lkml.org 
[lkml]   [2017]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: imx7d-sdb: Set VLDO4 outpt to 2.8V for MIPI CSI/DSI
Date
From: Gautam Bhat <mindentropy@gmail.com>

* According to mx7sabresd schematics the MIPI CSI/DSI voltage rails
should be 2.8V but the voltage provided is a maximum of 3.3V and
minimum of 1.8V. Providing such a higher voltage might damage the
peripherals and violates the schematic settings.

Signed-off-by: Gautam Bhat <mindentropy@gmail.com>
---
Changes in v2:
- Added subject line according to convention

arch/arm/boot/dts/imx7d-sdb.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 5be01a1bf840..1da1f97ec342 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -262,8 +262,8 @@
};

vgen6_reg: vldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
--
2.11.0
\
 
 \ /
  Last update: 2017-07-01 09:41    [W:0.115 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site