lkml.org 
[lkml]   [2017]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] selftests: add a generic testsuite for ethernet device
On Thu, Jun 29, 2017 at 11:26:40AM +0300, Fathi Boudra wrote:
> On 4 April 2017 at 16:32, Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
> > This patch add a generic testsuite for testing ethernet network device driver.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> >
> > Changes since v1:
> > - Test for starting master interface
> > - Changed printing format to "RESULT: $netdev: line"
> > - Use "ip link" to get device list
> >
> > tools/testing/selftests/net/Makefile | 2 +-
> > tools/testing/selftests/net/netdevice.sh | 200 +++++++++++++++++++++++++++++++
> > 2 files changed, 201 insertions(+), 1 deletion(-)
> > create mode 100755 tools/testing/selftests/net/netdevice.sh
> >
> > diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
> > index fbfe5d0..35cbb4c 100644
> > --- a/tools/testing/selftests/net/Makefile
> > +++ b/tools/testing/selftests/net/Makefile
> > @@ -5,7 +5,7 @@ CFLAGS += -I../../../../usr/include/
> >
> > reuseport_bpf_numa: LDFLAGS += -lnuma
> >
> > -TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh
> > +TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh
> > TEST_GEN_FILES = socket
> > TEST_GEN_FILES += psock_fanout psock_tpacket
> > TEST_GEN_FILES += reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa
> > diff --git a/tools/testing/selftests/net/netdevice.sh b/tools/testing/selftests/net/netdevice.sh
> > new file mode 100755
> > index 0000000..4e00568
> > --- /dev/null
> > +++ b/tools/testing/selftests/net/netdevice.sh
> > @@ -0,0 +1,200 @@
> > +#!/bin/sh
> > +#
> > +# This test is for checking network interface
> > +# For the moment it tests only ethernet interface (but wifi could be easily added)
> > +#
> > +# We assume that all network driver are loaded
> > +# if not they probably have failed earlier in the boot process and their logged error will be catched by another test
> > +#
> > +
> > +# this function will try to up the interface
> > +# if already up, nothing done
> > +# arg1: network interface name
> > +kci_net_start()
> > +{
> > + netdev=$1
> > +
> > + ip link show "$netdev" |grep -q UP
> > + if [ $? -eq 0 ];then
> > + echo "SKIP: $netdev: interface already up"
> > + return 0
> > + fi
> > +
> > + ip link set "$netdev" up
> > + if [ $? -ne 0 ];then
> > + echo "FAIL: $netdev: Fail to up interface"
> > + return 1
> > + else
> > + echo "PASS: $netdev: set interface up"
> > + NETDEV_STARTED=1
> > + fi
> > + return 0
> > +}
> > +
> > +# this function will try to setup an IP and MAC address on a network interface
> > +# Doing nothing if the interface was already up
> > +# arg1: network interface name
> > +kci_net_setup()
> > +{
> > + netdev=$1
> > +
> > + # do nothing if the interface was already up
> > + if [ $NETDEV_STARTED -eq 0 ];then
> > + return 0
> > + fi
> > +
> > + MACADDR='02:03:04:05:06:07'
> > + ip link set dev $netdev address "$MACADDR"
> > + if [ $? -ne 0 ];then
> > + echo "FAIL: $netdev: Cannot set MAC address"
> > + else
> > + ip link show $netdev |grep -q "$MACADDR"
> > + if [ $? -eq 0 ];then
> > + echo "PASS: $netdev: set MAC address"
> > + else
> > + echo "FAIL: $netdev: Cannot set MAC address"
> > + fi
> > + fi
> > +
> > + #check that the interface did not already have an IP
> > + ip address show "$netdev" |grep '^[[:space:]]*inet'
> > + if [ $? -eq 0 ];then
> > + echo "SKIP: $netdev: already have an IP"
> > + return 0
> > + fi
> > +
> > + # TODO what ipaddr to set ? DHCP ?
> > + echo "SKIP: $netdev: set IP address"
> > + return 0
> > +}
> > +
> > +# test an ethtool command
> > +# arg1: return code for not supported (see ethtool code source)
> > +# arg2: summary of the command
> > +# arg3: command to execute
> > +kci_netdev_ethtool_test()
> > +{
> > + if [ $# -le 2 ];then
> > + echo "SKIP: $netdev: ethtool: invalid number of arguments"
> > + return 1
> > + fi
> > + $3 >/dev/null
> > + ret=$?
> > + if [ $ret -ne 0 ];then
> > + if [ $ret -eq "$1" ];then
> > + echo "SKIP: $netdev: ethtool $2 not supported"
> > + else
> > + echo "FAIL: $netdev: ethtool $2"
> > + return 1
> > + fi
> > + else
> > + echo "PASS: $netdev: ethtool $2"
> > + fi
> > + return 0
> > +}
> > +
> > +# test ethtool commands
> > +# arg1: network interface name
> > +kci_netdev_ethtool()
> > +{
> > + netdev=$1
> > +
> > + #check presence of ethtool
> > + ethtool --version 2>/dev/null >/dev/null
> > + if [ $? -ne 0 ];then
> > + echo "SKIP: ethtool not present"
> > + return 1
> > + fi
> > +
> > + TMP_ETHTOOL_FEATURES="$(mktemp)"
> > + if [ ! -e "$TMP_ETHTOOL_FEATURES" ];then
> > + echo "SKIP: Cannot create a tmp file"
> > + return 1
> > + fi
> > +
> > + ethtool -k "$netdev" > "$TMP_ETHTOOL_FEATURES"
> > + if [ $? -ne 0 ];then
> > + echo "FAIL: $netdev: ethtool list features"
> > + rm "$TMP_ETHTOOL_FEATURES"
> > + return 1
> > + fi
> > + echo "PASS: $netdev: ethtool list features"
> > + #TODO for each non fixed features, try to turn them on/off
> > + rm "$TMP_ETHTOOL_FEATURES"
> > +
> > + kci_netdev_ethtool_test 74 'dump' "ethtool -d $netdev"
> > + kci_netdev_ethtool_test 94 'stats' "ethtool -S $netdev"
> > + return 0
> > +}
> > +
> > +# stop a netdev
> > +# arg1: network interface name
> > +kci_netdev_stop()
> > +{
> > + netdev=$1
> > +
> > + if [ $NETDEV_STARTED -eq 0 ];then
> > + echo "SKIP: $netdev: interface kept up"
> > + return 0
> > + fi
> > +
> > + ip link set "$netdev" down
> > + if [ $? -ne 0 ];then
> > + echo "FAIL: $netdev: stop interface"
> > + return 1
> > + fi
> > + echo "PASS: $netdev: stop interface"
> > + return 0
> > +}
> > +
> > +# run all test on a netdev
> > +# arg1: network interface name
> > +kci_test_netdev()
> > +{
> > + NETDEV_STARTED=0
> > + IFACE_TO_UPDOWN="$1"
> > + IFACE_TO_TEST="$1"
> > + #check for VLAN interface
> > + MASTER_IFACE="$(echo $1 | cut -d@ -f2)"
> > + if [ ! -z "$MASTER_IFACE" ];then
> > + IFACE_TO_UPDOWN="$MASTER_IFACE"
> > + IFACE_TO_TEST="$(echo $1 | cut -d@ -f1)"
> > + fi
> > +
> > + NETDEV_STARTED=0
> > + kci_net_start "$IFACE_TO_UPDOWN"
> > +
> > + kci_net_setup "$IFACE_TO_TEST"
> > +
> > + kci_netdev_ethtool "$IFACE_TO_TEST"
> > +
> > + kci_netdev_stop "$IFACE_TO_UPDOWN"
> > + return 0
> > +}
> > +
> > +#check for needed privileges
> > +if [ "$(id -u)" -ne 0 ];then
> > + echo "SKIP: Need root privileges"
> > + exit 0
> > +fi
> > +
> > +ip -Version 2>/dev/null >/dev/null
>
> is the test supposed to work with busybox's ip or only with iproute2 version?
>
> # ip -Version
> BusyBox v1.24.1 (2017-06-14 13:46:50 UTC) multi-call binary.
>
> Usage: ip [OPTIONS] {address | route | link | tunnel | } {COMMAND}
>

Hello

Since I have forgotten that busybox have the ip tool, I have tested only with iproute2.
But someone just sent a patch for handling busybox ip.

Regards

\
 
 \ /
  Last update: 2017-07-01 08:44    [W:1.374 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site