lkml.org 
[lkml]   [2017]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V2 0/5] phy: bcm-ns-usb3: add MDIO driver
Date
From: Rafał Miłecki <rafal@milecki.pl>

As explained in the commit 9200c6f177638 ("Revert "phy: Add USB3 PHY support
for Broadcom NSP SoC"") this module should be modified to use MDIO bus as
this is how PHY is really attached.

This should allow reusing this driver on NSP and any other platform with
MDIO bus and this particular PHY.

V2: Rebase and update 4/5 and 5/5.

Rafał Miłecki (5):
phy: bcm-ns-usb3: always wait for idle after writing to the PHY reg
phy: bcm-ns-usb3: use pointer for PHY writing function
phy: bcm-ns-usb3: enable MDIO in the platform specific code
dt-bindings: phy: Modify Broadcom NS USB 3.0 PHY binding to use MDIO
phy: bcm-ns-usb3: add MDIO driver using proper bus layer

.../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 27 ++-
drivers/phy/broadcom/Kconfig | 1 +
drivers/phy/broadcom/phy-bcm-ns-usb3.c | 230 +++++++++++++++------
3 files changed, 186 insertions(+), 72 deletions(-)

--
2.11.0

\
 
 \ /
  Last update: 2017-06-12 01:35    [W:0.136 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site