lkml.org 
[lkml]   [2017]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller on ap806
Date
Hi,

On mer., mai 31 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> The new binding for the system controller on ap806 moved the clock into a
> subnode. This preliminary step will allow to add gpio and pinctrl
> subnodes
>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>


Applied on mvebu/dt64

Gregory

> ---
> arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 0c25ec62a2a3..205037e3e7dc 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -193,7 +193,7 @@
> #size-cells = <0>;
> cell-index = <0>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
> };
>
> @@ -204,7 +204,7 @@
> #size-cells = <0>;
> interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
> };
>
> @@ -214,7 +214,7 @@
> reg-shift = <2>;
> interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
> };
>
> @@ -224,7 +224,7 @@
> reg-shift = <2>;
> interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> - clocks = <&ap_syscon 3>;
> + clocks = <&ap_clk 3>;
> status = "disabled";
>
> };
> @@ -234,17 +234,20 @@
> reg = <0x6e0000 0x300>;
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> clock-names = "core";
> - clocks = <&ap_syscon 4>;
> + clocks = <&ap_clk 4>;
> dma-coherent;
> marvell,xenon-phy-slow-mode;
> status = "disabled";
> };
>
> ap_syscon: system-controller@6f4000 {
> - compatible = "marvell,ap806-system-controller",
> - "syscon";
> - #clock-cells = <1>;
> + compatible = "syscon", "simple-mfd";
> reg = <0x6f4000 0x1000>;
> +
> + ap_clk: clock {
> + compatible = "marvell,ap806-clock";
> + #clock-cells = <1>;
> + };
> };
> };
> };
> --
> git-series 0.9.1
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2017-06-12 01:33    [W:0.066 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site