lkml.org 
[lkml]   [2017]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 10/17] irqchip: New RISC-V PLIC Driver
CC irqchip folks

On Wed, Jun 7, 2017 at 1:00 AM, Palmer Dabbelt <palmer@dabbelt.com> wrote:
> This patch adds a driver for the Platform Level Interrupt Controller
> (PLIC) specified as part of the RISC-V supervisor level ISA manual.
> The PLIC connocts global interrupt sources to the local interrupt
> controller on each hart. A PLIC is present on all RISC-V systems.
>
> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
> ---
> drivers/irqchip/Kconfig | 12 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-riscv-plic.c | 253 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 266 insertions(+)
> create mode 100644 drivers/irqchip/irq-riscv-plic.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 478f8ace2664..2906d63934ef 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -301,3 +301,15 @@ config QCOM_IRQ_COMBINER
> help
> Say yes here to add support for the IRQ combiner devices embedded
> in Qualcomm Technologies chips.
> +
> +config RISCV_PLIC
> + bool "Platform-Level Interrupt Controller"
> + depends on RISCV
> + default y
> + help
> + This enables support for the PLIC chip found in standard RISC-V
> + systems. The PLIC is the top-most interrupt controller found in
> + the system, connected directly to the core complex. All other
> + interrupt sources (MSI, GPIO, etc) are subordinate to the PLIC.
> +
> + If you don't know what to do here, say Y.
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index b64c59b838a0..bed94cc89146 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -76,3 +76,4 @@ obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
> obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o
> obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
> obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
> +obj-$(CONFIG_RISCV_PLIC) += irq-riscv-plic.o
> diff --git a/drivers/irqchip/irq-riscv-plic.c b/drivers/irqchip/irq-riscv-plic.c
> new file mode 100644
> index 000000000000..906c8a62a911
> --- /dev/null
> +++ b/drivers/irqchip/irq-riscv-plic.c
> @@ -0,0 +1,253 @@
> +/*
> + * Copyright (C) 2017 SiFive
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation, version 2.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +
> +/* From the RISC-V Privlidged Spec v1.10:
> + *
> + * Global interrupt sources are assigned small unsigned integer identifiers,
> + * beginning at the value 1. An interrupt ID of 0 is reserved to mean “no
> + * interrupt”. Interrupt identifiers are also used to break ties when two or
> + * more interrupt sources have the same assigned priority. Smaller values of
> + * interrupt ID take precedence over larger values of interrupt ID.
> + *
> + * It's not defined what the largest device ID is, so we're just fixing
> + * MAX_DEVICES right here (which is named oddly, as there will never be a
> + * device 0).
> + */
> +#define MAX_DEVICES 1024
> +#define MAX_CONTEXTS 15872
> +
> +#define PRIORITY_BASE 0
> +#define ENABLE_BASE 0x2000
> +#define ENABLE_SIZE 0x80
> +#define HART_BASE 0x200000
> +#define HART_SIZE 0x1000
> +
> +struct plic_hart_context {
> + u32 threshold;
> + u32 claim;
> +};
> +
> +struct plic_enable_context {
> + atomic_t mask[32]; // 32-bit * 32-entry
> +};
> +
> +struct plic_priority {
> + u32 prio[MAX_DEVICES];
> +};
> +
> +struct plic_data {
> + struct irq_chip chip;
> + struct irq_domain *domain;
> + u32 ndev;
> + void __iomem *reg;
> + int handlers;
> + struct plic_handler *handler;
> + char name[30];
> +};
> +
> +struct plic_handler {
> + struct plic_hart_context *context;
> + struct plic_data *data;
> +};
> +
> +static inline
> +struct plic_hart_context *plic_hart_context(struct plic_data *data, size_t i)
> +{
> + return (struct plic_hart_context *)((char *)data->reg + HART_BASE + HART_SIZE*i);
> +}
> +
> +static inline
> +struct plic_enable_context *plic_enable_context(struct plic_data *data, size_t i)
> +{
> + return (struct plic_enable_context *)((char *)data->reg + ENABLE_BASE + ENABLE_SIZE*i);
> +}
> +
> +static inline
> +struct plic_priority *plic_priority(struct plic_data *data)
> +{
> + return (struct plic_priority *)((char *)data->reg + PRIORITY_BASE);
> +}
> +
> +static void plic_disable(struct plic_data *data, int i, int hwirq)
> +{
> + struct plic_enable_context *enable = plic_enable_context(data, i);
> +
> + atomic_and(~(1 << (hwirq % 32)), &enable->mask[hwirq / 32]);
> +}
> +
> +static void plic_enable(struct plic_data *data, int i, int hwirq)
> +{
> + struct plic_enable_context *enable = plic_enable_context(data, i);
> +
> + atomic_or((1 << (hwirq % 32)), &enable->mask[hwirq / 32]);
> +}
> +
> +// There is no need to mask/unmask PLIC interrupts
> +// They are "masked" by reading claim and "unmasked" when writing it back.
> +static void plic_irq_mask(struct irq_data *d) { }
> +static void plic_irq_unmask(struct irq_data *d) { }
> +
> +static void plic_irq_enable(struct irq_data *d)
> +{
> + struct plic_data *data = irq_data_get_irq_chip_data(d);
> + struct plic_priority *priority = plic_priority(data);
> + int i;
> +
> + iowrite32(1, &priority->prio[d->hwirq]);
> + for (i = 0; i < data->handlers; ++i)
> + if (data->handler[i].context)
> + plic_enable(data, i, d->hwirq);
> +}
> +
> +static void plic_irq_disable(struct irq_data *d)
> +{
> + struct plic_data *data = irq_data_get_irq_chip_data(d);
> + struct plic_priority *priority = plic_priority(data);
> + int i;
> +
> + iowrite32(0, &priority->prio[d->hwirq]);
> + for (i = 0; i < data->handlers; ++i)
> + if (data->handler[i].context)
> + plic_disable(data, i, d->hwirq);
> +}
> +
> +static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + struct plic_data *data = d->host_data;
> +
> + irq_set_chip_and_handler(irq, &data->chip, handle_simple_irq);
> + irq_set_chip_data(irq, data);
> + irq_set_noprobe(irq);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops plic_irqdomain_ops = {
> + .map = plic_irqdomain_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void plic_chained_handle_irq(struct irq_desc *desc)
> +{
> + struct plic_handler *handler = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct irq_domain *domain = handler->data->domain;
> + u32 what;
> +
> + chained_irq_enter(chip, desc);
> +
> + while ((what = ioread32(&handler->context->claim))) {
> + int irq = irq_find_mapping(domain, what);
> +
> + if (irq > 0)
> + generic_handle_irq(irq);
> + else
> + handle_bad_irq(desc);
> + iowrite32(what, &handler->context->claim);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static int plic_init(struct device_node *node, struct device_node *parent)
> +{
> + struct plic_data *data;
> + struct resource resource;
> + int i, ok = 0;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (WARN_ON(!data))
> + return -ENOMEM;
> +
> + data->reg = of_iomap(node, 0);
> + if (WARN_ON(!data->reg))
> + return -EIO;
> +
> + of_property_read_u32(node, "riscv,ndev", &data->ndev);
> + if (WARN_ON(!data->ndev))
> + return -EINVAL;
> +
> + data->handlers = of_irq_count(node);
> + if (WARN_ON(!data->handlers))
> + return -EINVAL;
> +
> + data->handler =
> + kcalloc(data->handlers, sizeof(*data->handler), GFP_KERNEL);
> + if (WARN_ON(!data->handler))
> + return -ENOMEM;
> +
> + data->domain = irq_domain_add_linear(node, data->ndev+1, &plic_irqdomain_ops, data);
> + if (WARN_ON(!data->domain))
> + return -ENOMEM;
> +
> + of_address_to_resource(node, 0, &resource);
> + snprintf(data->name, sizeof(data->name),
> + "riscv,plic0,%llx", resource.start);
> + data->chip.name = data->name;
> + data->chip.irq_mask = plic_irq_mask;
> + data->chip.irq_unmask = plic_irq_unmask;
> + data->chip.irq_enable = plic_irq_enable;
> + data->chip.irq_disable = plic_irq_disable;
> +
> + for (i = 0; i < data->handlers; ++i) {
> + struct plic_handler *handler = &data->handler[i];
> + struct of_phandle_args parent;
> + int parent_irq, hwirq;
> +
> + if (of_irq_parse_one(node, i, &parent))
> + continue;
> + // skip context holes
> + if (parent.args[0] == -1)
> + continue;
> +
> + // skip any contexts that lead to inactive harts
> + if (of_device_is_compatible(parent.np, "riscv,cpu-intc") &&
> + parent.np->parent &&
> + riscv_of_processor_hart(parent.np->parent) < 0)
> + continue;
> +
> + parent_irq = irq_create_of_mapping(&parent);
> + if (!parent_irq)
> + continue;
> +
> + handler->context = plic_hart_context(data, i);
> + handler->data = data;
> + // hwirq prio must be > this to trigger an interrupt
> + iowrite32(0, &handler->context->threshold);
> +
> + for (hwirq = 1; hwirq <= data->ndev; ++hwirq)
> + plic_disable(data, i, hwirq);
> + irq_set_chained_handler_and_data(parent_irq, plic_chained_handle_irq, handler);
> + ++ok;
> + }
> +
> + printk(KERN_INFO "%s: mapped %d interrupts to %d/%d handlers\n",
> + data->name, data->ndev, ok, data->handlers);
> + WARN_ON(!ok);
> + return 0;
> +}
> +
> +IRQCHIP_DECLARE(plic0, "riscv,plic0", plic_init);
> --
> 2.13.0

\
 
 \ /
  Last update: 2017-06-12 00:59    [W:0.796 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site