lkml.org 
[lkml]   [2017]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 20/34] media: imx: Add a TODO file
Date
Add a TODO file.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
drivers/staging/media/imx/TODO | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 drivers/staging/media/imx/TODO

diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO
new file mode 100644
index 0000000..0bee313
--- /dev/null
+++ b/drivers/staging/media/imx/TODO
@@ -0,0 +1,23 @@
+
+- Clean up and move the ov5642 subdev driver to drivers/media/i2c, or
+ merge support for OV5642 into drivers/media/i2c/ov5640.c, and create
+ the binding docs for it.
+
+- The Frame Interval Monitor could be exported to v4l2-core for
+ general use.
+
+- At driver load time, the device-tree node that is the original source
+ (the "sensor"), is parsed to record its media bus configuration, and
+ this info is required in imx-media-csi.c to setup the CSI.
+ Laurent Pinchart argues that instead the CSI subdev should call its
+ neighbor's g_mbus_config op (which should be propagated if necessary)
+ to get this info. However Hans Verkuil is planning to remove the
+ g_mbus_config op. For now this driver uses the parsed DT mbus config
+ method until this issue is resolved.
+
+- This media driver supports inheriting V4L2 controls to the
+ video capture devices, from the subdevices in the capture device's
+ pipeline. The controls for each capture device are updated in the
+ link_notify callback when the pipeline is modified. It should be
+ decided whether this feature is useful enough to make it generally
+ available by exporting to v4l2-core.
--
2.7.4
\
 
 \ /
  Last update: 2017-06-12 01:09    [W:0.323 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site