lkml.org 
[lkml]   [2017]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] DT: pinctrl: Add binding documentation for Spreadtrum pin controller
Date
This patch adds the binding documentation for Spreadtrum SC9860 pin
controller device.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
---
Changes since v2:
- No updates.

Changes since v1:
- Remove magic numbers and get to use the standard bindings.
- Fix some typos.
---
.../devicetree/bindings/pinctrl/sprd,pinctrl.txt | 56 +++++++++++++++++
.../bindings/pinctrl/sprd,sc9860-pinctrl.txt | 66 ++++++++++++++++++++
2 files changed, 122 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
new file mode 100644
index 0000000..2f544cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
@@ -0,0 +1,56 @@
+* Spreadtrum Pin Controller
+
+The Spreadtrum pin controller are organized in 3 blocks (types).
+
+The first block comprises some global control registers, and each
+register contains several bit fields with one bit or several bits
+to configure for some global common configuration, such as domain
+pad driving level, system control select and so on. We recognise
+every fields comprising one bit or several bits in one global control
+register as one pin, thus we should record every pin's bit offset,
+bit width and register offset to configure this field (pin). Since
+this type pins' configuration are very tricky and different for each
+register, we introduce "sprd,ctrl" property to set the various global
+control configuration.
+
+The second block comprises some common registers which have unified
+register definition, and each register described one pin is used
+to configure the pin sleep mode and function select. Now we have 4
+systems on SC9860 SoC: AP system, PUBCP system, TGLDSP system and
+AGDSP system. In some situation we have some pin-sleep related
+configuration need to set when one of system goes into deep sleep
+mode. For example, if we set the pin sleep mode as AP_SLEEP, which
+means when AP system goes into deep sleep mode, this pin's sleep
+related properties (input/output or pullup/down) will be set
+automatically. Thus we intoduce "sprd,sleep_mode" to set pin sleep
+mode.
+
+The last block comprises some misc registers which also have unified
+register definition, and each register described one pin is used to
+configure drive strength, pull up/down and so on. Especially for pull
+up, we introduce "sprd,pullup" property for two kind configuration:
+PULLUP_20K or PULLUP_4_7K, which means the pullup resistor is 20K or
+4.7K.
+
+Required properties for Spreadtrum pin controller:
+- compatible: "sprd,<soc>-pinctrl"
+ Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs.
+- reg: The register address of pin controller device.
+- pins : An array of pin names.
+
+Optional properties:
+- function: Specified the function name.
+- drive-strength: Drive strength in mA.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- sprd,ctrl: Control values referring to databook for global control pins.
+- sprd,sleep_mode: Sleep mode selection.
+- sprd,pullup: Pull up on pin.
+- sprd,input-sleep: Input enable when system goes into deep sleep mode.
+- sprd,output-sleep: Output enable when system goes into deep sleep mode.
+- sprd,pullup_sleep: Pull up enable when system goes into deep sleep mode.
+- sprd,pulldown_sleep: Pull down enable when system goes into deep sleep mode.
+
+Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values.
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
new file mode 100644
index 0000000..10b77e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
@@ -0,0 +1,66 @@
+* Spreadtrum SC9860 Pin Controller
+
+Please refer to sprd,pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: Must be "sprd,sc9860-pinctrl".
+- reg: The register address of pin controller device.
+- pins : An array of strings, each string containing the name of a pin.
+
+Optional properties:
+- function: A string containing the name of the function, values must be
+ one of: "func1", "func2", "func3" and "func4".
+- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
+ 12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- sprd,ctrl: Control values referring to databook for global control pins.
+- sprd,sleep_mode: Choose the pin sleep mode, and supported values are:
+ AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP.
+- sprd,pullup: Pull up on pin, the value should be PULLUP_20K or PULLUP_4_7K.
+- sprd,input-sleep: Input enable when system goes into deep sleep mode.
+- sprd,output-sleep: Output enable when system goes into deep sleep mode.
+- sprd,pullup_sleep: Pull up enable when system goes into deep sleep mode.
+- sprd,pulldown_sleep: Pull down enable when system goes into deep sleep mode.
+
+Pin sleep mode definition:
+enum pin_sleep_mode {
+ AP_SLEEP = BIT(0),
+ PUBCP_SLEEP = BIT(1),
+ TGLDSP_SLEEP = BIT(2),
+ AGDSP_SLEEP = BIT(3),
+};
+
+Pin pullup mode definition:
+enum pin_pullup_sel {
+ PULLUP_20K,
+ PULLUP_4_7K,
+};
+
+Example:
+pin_controller: pinctrl@402a0000 {
+ compatible = "sprd,sc9860-pinctrl";
+ reg = <0x402a0000 0x10000>;
+
+ grp1: sd0 {
+ pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE";
+ sprd,ctrl = <0x1>;
+ };
+
+ grp2: rfctl_33 {
+ pins = "SC9860_RFCTL33";
+ function = "func2";
+ sprd,sleep_mode = <AP_SLEEP | PUBCP_SLEEP>;
+ sprd,output-sleep;
+ };
+
+ grp3: rfctl_misc_20 {
+ pins = "SC9860_RFCTL20_MISC";
+ drive-strength = <10>;
+ sprd,pullup = <PULLUP_4_7K>;
+ sprd,pullup-sleep;
+ };
+};
--
1.7.9.5
\
 
 \ /
  Last update: 2017-06-12 00:47    [W:0.083 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site